Samsung DCB-P850R

Post by **The Robman** » Sun Jan 14, 2007 12:21 pm

Take a look at the OBCs that you calculated, they are all in the 200+ range, whereas the ones I calculated are all in the lower digits. The reason for this is that you have grabbed the "complement" bits rather than the real OBC bits. To convert your OBCs into the real OBCs you should subtract them from 255.

I have done this here...
http://www.hifi-remote.com/forums/dload ... le_id=4073

Mor@ · Post by **Mor@** » Sun Jan 14, 2007 3:13 pm

Yep, right again.

Thanks for all the help.

I guess I'll manage the remaining buttons now and will post the upgrade as soon as I'm done.

Marcus.

Post by **The Robman** » Sun Jan 14, 2007 5:43 pm

One note about your upgrade, I notice that you have been putting the real button names (from the OEM remote) in the Notes column, the correct procedure should be to put these names in the Functions column (the Notes column is just there in case you want to explain what a button with an unusual name does). Then in the Buttons sheet, you would select these OEM names and assign them to the physical buttons on your JP1 remote. Take a look at the upgrade that I just posted to get the idea.

Mor@ · Post by **Mor@** » Mon Jan 15, 2007 3:20 am

Ok Rob, that's understood.