Page 2 of 2
Posted: Thu Oct 05, 2006 6:27 am
by The Robman
Just FYI, my unit's model number is: RCD-W1 and the remote is RM-R50.
The Finalize button learns as Sony20, device 26, sub-device 202, OBC 80
And just in case you need it, the Input button is OBC 102
Posted: Thu Oct 05, 2006 9:53 pm
by CindyD
Thanks Rob!
Posted: Fri Oct 06, 2006 12:24 pm
by CindyD
I got my RMT D223A today for the GX315. I finally figured out how to learn and just download with the JP1
. I'm getting there!
Sony 20
Device 26
Sub-Device 250
OBC 83
Hex Cmd CA
EFC 092
Posted: Fri Oct 06, 2006 2:03 pm
by The Robman
It looks like Sony is using different sub-device codes for some of the different models of their CD recorders, so I think we both need to capture all of the buttons from our remotes and post the upgrades.
Posted: Sat Oct 07, 2006 5:23 pm
by CindyD
Will do!
Posted: Sat Oct 07, 2006 6:09 pm
by CindyD
Rob, are your numbers for the actual finalizing or System menu? My numbers bring up the menu and I must scroll to finalized. My numbers are for the system menu.
Posted: Sat Oct 07, 2006 6:38 pm
by CindyD
So far the OBC codes seem to be the same. The difference is the sub-device code of 250.
Posted: Sun Oct 08, 2006 8:47 am
by The Robman
My remote has a FINALIZE button that you have to press, followed by the PLAY button, when you have finished recording a CD, that is the button that I recorded. My CD recorder doesn't hook up to a TV, so I don't have a system menu of any sort.
Posted: Sun Oct 08, 2006 2:11 pm
by CindyD
I wish my remote only used a finalized button. Scrolling thru the menu to finalize becomes a pain in the butt. I have to scroll to finalize on my Sanyo also.
I am off to build the upgrade for my GX315 and the Sanyo later.
