9960B01 / 9960BJ4 - No Definition/No Data in signature

Scoobydoo · Post by **Scoobydoo** » Fri Oct 21, 2005 5:26 pm

Hi Robman,

Once again, I really appreciate the help.

I guess this is what you wanted.

Download from remote using no RDF file.

0000: FF FF 4E 6F 74 46 6F 75 6E 64 FF FF FF FF FF FF
0010: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0020: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0030: FF ....All FFFF.........

I got this the first time I tried. (not sure why it was different)

0000: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0010: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0020: 01 1D 01 23 5A 1A 7E FE 21 20 FB 00 CF 4F 8F AF
0030: 2F 0F 37 AF 2F 4F CF 77 87 97 A7 67 D7 00 01 06
0040: B5 01 04 00 00 FF FF FF FF FF FF FF FF FF FF FF

Scoob

Post by **The Robman** » Fri Oct 21, 2005 7:14 pm

Have you tried doing a 981 reset on the remote and then doing a download? I don't know what it is about these BJ5 remotes, but you're not the first person to have problems with them. The guys at UEI say that while there has been a firmware change, it should be anything that affects how the data downloads, so I don't know what to suggest.

If this model os on sale at Best Buy now, maybe I'll get one to see what I can do with it.

Scoobydoo · Post by **Scoobydoo** » Fri Oct 21, 2005 7:47 pm

The Robman wrote:Have you tried doing a 981 reset on the remote and then doing a download? I don't know what it is about these BJ5 remotes, but you're not the first person to have problems with them. The guys at UEI say that while there has been a firmware change, it should be anything that affects how the data downloads, so I don't know what to suggest.

If this model os on sale at Best Buy now, maybe I'll get one to see what I can do with it.

Hi Robman,

This one I bought off of Ebay.

I just picked up another one few minutes ago @ BB. (it also says URC9960B01 on the back). Now I have 2 to experiment with.

As far as the reset, I tried, but I'm not sure if I'm doing it correct.
I hold down Setup and enter setup mode. Then hit device setup to get the number pad to illuminate, then key in 981. I really don't see that it is doing anything.
----------------------------------------
Edit: I wasn't pressing "other" before entering reset code. It just reset. I'm gonna hookup the JP1 cable and see if it makes any difference.
-------------------------------------------------------

Scoob

Scoobydoo · Post by **Scoobydoo** » Fri Oct 21, 2005 8:15 pm

OK,

After doing the reset, it downloaded from the remote.

I'm still getting error messages when tring to do an uprade to the remote. It seems like I need to keep resetting all the trime

I'll keep experimenting.

0000: D9 26 4B 41 53 41 4B 41 53 30 01 88 10 2F 20 3C
0010: 31 F7 40 20 52 7C 63 FF 01 DC 40 01 FF 03 06 00
0020: 00 05 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0030: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0040: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0100: 01 04 01 04 00 00 00 00 21 20 FB 00 CF 4F 8F AF
0110: 2F 0F 37 AF 2F 4F CF 77 87 97 A7 67 D7 00 01 06
0120: B5 01 04 00 00 FF FF FF FF FF FF FF FF FF FF FF
0130: FF FF FF FF FF FF FF FF FF

Scoob

Scoobydoo · Post by **Scoobydoo** » Sat Oct 22, 2005 6:41 am

Update,

I have been having pretty much the same trouble and error messages with the second remote.
What seems really strange is that I have not been able to download from this second remote yet, but I did manage to program it with one device upgrade file.
I was using the JP5 RDF file, and although I did get error messages, the upgrade for 1 device did work.

I did get one read from the remote, right after it took the upgrade.
I don't know if this means anything.....

0000: 19 E6 4B 41 53 41 4B 41 53 30 06 B5 10 2F 20 3C
0010: 31 F7 40 20 52 7C 63 FF 01 DC 44 01 FF 03 06 00
0020: 00 05 FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0030: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0040: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0050: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0060: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0070: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0080: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0090: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00A0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00B0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00C0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00D0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00E0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
00F0: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0100: 01 1D 01 23 5A 1A 7E FE 21 20 FB 00 CF 4F 8F AF
0110: 2F 0F 37 AF 2F 4F CF 77 87 97 A7 67 D7 00 01 06
0120: B5 01 04 00 00 FF FF FF FF FF FF FF FF FF FF FF
0130: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0140: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
all FFFFF................

Weird.

Scoob

Post by **The Robman** » Sat Oct 22, 2005 7:10 am

Those dumps look pretty standard, in fact the second one even has an upgrade for CBL/1717 in it, so I'm at a loss as to what the problem is. I wonder if they changed something in the hardware.