BIN codes for Philips DVP 3150V

alanrichey · Post by **alanrichey** » Mon Oct 22, 2012 5:40 am

No, all I can do is build it according to the transmissions I get from my Harmony. There would be no logic in using a different protocol. Unless the experts know differently ?

Post by **vickyg2003** » Mon Oct 22, 2012 8:22 am

Alan, I had imported your first attempt on my desktop and it had showed up as RC5/6 combo, I imported the latest bin and its showing up as panasonic. I don't know if I have a bad version of RMIR on this laptop, but I suspect that its the zip file that is the problem.

Once you correct that, we'll be back to RC5 and RC6 issues. I used an exact match of the harmony things, and the numeric buttons are all repeated in RC5. I think the reason the buttons were not working has to do with the viewing mode of the DVD/VCR button being incompatible with the RC6 buttons. Look at the RDMU I posted, and you'll see what I mean.

alanrichey · Post by **alanrichey** » Mon Oct 22, 2012 8:55 am

Whoops again . That what comes of trying to built 3 Custom Remotes at the same time. I've done it again, properly I hope, now at
https://www.hifi-remote.com/forums/dload ... e_id=11418

If that doesn't work and I recompile using RC5 do I use the 5 as the Device Number ? Becasue from my Harmony I am only getting RC6, Device 4.

Post by **vickyg2003** » Mon Oct 22, 2012 10:13 am

alanrichey wrote:If that doesn't work and I recompile using RC5 do I use the 5 as the Device Number ? Becasue from my Harmony I am only getting RC6, Device 4.

Alan, while the DVP3150V didn't have the keys, the DVP3150V/37 did have the keys that the user needs. Just use my RDMU file and get the VCR number buttons.

byrdley20 · Post by **byrdley20** » Mon Oct 29, 2012 10:19 pm

Sorry all, I haven't had a chance to test out the latest remote by Alan. Kids will do that to you

I will try it as soon as possible and report back my findings. Thanks for your patience!

alanrichey · Post by **alanrichey** » Tue Nov 06, 2012 11:42 pm

I guess we will never get the feedback on this one. Time to give up I think

byrdley20 · Post by **byrdley20** » Fri Nov 09, 2012 6:37 am

I will get you feedback, I promise. My slingbox is hooked up at my dad's house, and he had to unplug it to use the network cable for something else. Once he gets it hooked back up, I'll try the latest file out and let you know. Again, sorry for the delay.

byrdley20 · Post by **byrdley20** » Fri Nov 09, 2012 8:49 pm

Ok, I got my dad to hook it back up and tested it out tonight. This time none of the buttons work. What if I said that I don't need the power button? Just the channel up/down & number keys (or even one of these is ok). Would that make things easier?

Thanks for your patience. Sorry about the long disappearance.

alanrichey · Post by **alanrichey** » Fri Nov 09, 2012 10:49 pm

byrdley20 wrote:What if I said that I don't need the power button? Just the channel up/down & number keys (or even one of these is ok). Would that make things easier?

Afraid not. And you really need to somehow check the IR Blasters are actually firing otherwise we are wasting our time. http://support.slingbox.com/get/KB-5000042.html

byrdley20 · Post by **byrdley20** » Sat Nov 10, 2012 4:26 pm

I'm sure they are firing. The files you posted on Oct. 20 worked for the power button, but nothing else. So that tells me they are firing fine. Any other ideas? Should I just go buy a different VCR?

Post by **The Robman** » Sat Nov 10, 2012 4:56 pm

alanrichey wrote:OK, just to make sure, I have updated my original attempt with the buttons now mapped.

https://www.hifi-remote.com/forums/dload ... e_id=11418

Just give it a try

Al, could you post the RM file that you're using please.

Post by **vickyg2003** » Sat Nov 10, 2012 10:11 pm

I swore I was going to stay out of this thread, because the byrdleys slow response is driving me nuts, but I can't keep from meddling.

Ssmething really seems to be wrong with the zip file at file id 11418. I had looked at it earlier and it had 4 bins, now it has 2 bins and they are nonsensical.

So I've uploaded a zip file with replacements Y2000 uses the VCR functions and Y2001 is DVD mode.
https://www.hifi-remote.com/forums/dload ... e_id=11506

I believe Y2000 is what the user needs.

Good Luck byrdley

alanrichey · Post by **alanrichey** » Sun Nov 11, 2012 2:44 am

vickyg2003 wrote:Something really seems to be wrong with the zip file at file id 11418. I had looked at it earlier and it had 4 bins, now it has 2 bins and they are nonsensical.

Odd. I just checked it and it looks fine. I downloaded the BIN files and imported the PL one into RM and it was fine, using RC6 Device 4. What are you seeing ?

alanrichey · Post by **alanrichey** » Sun Nov 11, 2012 2:46 am

The Robman wrote:Al, could you post the RM file that you're using please.

https://www.hifi-remote.com/forums/dload ... e_id=11507

Post by **vickyg2003** » Sun Nov 11, 2012 5:44 am

alanrichey wrote:
vickyg2003 wrote:Something really seems to be wrong with the zip file at file id 11418. I had looked at it earlier and it had 4 bins, now it has 2 bins and they are nonsensical.
Odd. I just checked it and it looks fine. I downloaded the BIN files and imported the PL one into RM and it was fine, using RC6 Device 4. What are you seeing ?

The PL file was using pid:0058 and the RV file was using a NEC1. So I rechecked the name of the zip file and the extract path. Both were fine. I re-extracted them, and carefully inspected the bin number. So, I really thought maybe it was my version of RM, so I created the bins myself and imported them and RM worked fine. I have a rather poor internet connection, but I assume if the download didn't go right I'd get an error message during the extract.