Page 2 of 2
Posted: Thu Dec 26, 2013 3:25 pm
by Steevo
The Robman wrote:ok, I've created a RID file for you here:
https://www.hifi-remote.com/forums/dload ... e_id=11260
I've included a copy of extract_rtv and a bat file in there to make it really easy to install, if you have your R5k drive attached to your PC.
I don't know much about the R4k series and I've never owned one myself. I know they use RID files, so the file should work for you, but I don't know if the extract_rtv procedure is any different. Henry should be able to advise you with that.
How can I add sonicview to this one? Do we have the codes? I guess you used ridgen, right? (I've been reading)
I can use your batch file and add the sonicview to the Humax and run it on a disk I just prepped for a RTV 5K
Posted: Fri Dec 27, 2013 10:27 am
by Steevo
I found the sonicview rid file
https://www.hifi-remote.com/forums/dload ... le_id=7940
I can open it in ridgen. I clicked load, S1000fi.rid, and the ridgen window is populated.
I click save and I have a s1000fi.rid
The batch file now says
Code: Select all
@ECHO OFF
ECHO "To install new 0237 IR code to Replaytv5000/5500 answer "y" to all prompts then press the Enter key"
pause
ECHO "Installing C0237 code"
extract_rtv -p1 -w user/mirror/sys-setup-gaea/data/irCodeset/C0237fi.rid C0237fi.rid
extract_rtv -p1 -w user/mirror/sys-setup-gaea/data/irCodeset/S1000fi.rid S1000fi.rid
pause
EXIT
Will this now add both the 0347 for the Humax and the 1000 for the sonciview properly?
Posted: Tue Jan 07, 2014 4:45 pm
by Steevo
Dead silence on this one.
Heh