JP1 Remotes

Greg addressed the 004B this morning, check out this thread.

That certainly seems to solve the save/reload corruption problem. Works fine now.

So I have updated the BIN files I produced at https://www.hifi-remote.com/forums/dload ... le_id=8227 with the new version.

Be interested to know if it helps.

I will test it as soon as I get home from work (I am at GMT +3). I have a feeling it would be fine now

I am without words to tell you how I appreciate your swift help and kindness. You Rock!

Thanks again, and will update soon,

It works! I loaded Rob's KM file into RM and created my own button layout, tested and everything is fine. Alan, I didn't test your bin file specifically, but I am pretty sure it would also work. Do you want me to test it?

Ok, so now one of our files should be uploaded to Hifi-Remote for all that needs it.


Thanks a lot

fichmana2003 wrote:It works! Alan, I didn't test your bin file specifically, but I am pretty sure it would also work. Do you want me to test it?

If you have time it would set my mind at rest

Alan, your file does not work correctly (as before). I had to correct the RDF per Rob's instructions to make my bin file work as expected. Did you modify '004B' to '004B:7' in [protocols] section? I also use the latest slingbox RDF you posted in the forum (thanks for that, too!).

No, I had just tweaked Protocols.ini using the changes suggested by Greg at https://www.hifi-remote.com/forums/viewtopic.php?t=10540. I'll make that change as well

Thanks

Al

Actually, I did not modify protocols.ini at all (it will prevent RMDU corruption when loaded/saved). I modified the RDF, loaded Rob's KM file, corrected button layout and exported to bin.

alexf

As you say, it looks as though you need to make both corrections to get a 100% solution.

That was an interesting ride

alexf