JP1 Remotes

Reviving this 20-year-old Sunfire thread as it has just come to my attention that UEI also created an executor for this, called $0191. So, I have had a go at creating a protocols.ini entry for it.

I have created 2 new upgrades for Zones 1 and 2 here:
https://www.hifi-remote.com/forums/dload ... e_id=26989
https://www.hifi-remote.com/forums/dload ... e_id=26990

[Sunfire]
PID=01 91
DevParms=Device Code:4=0
DeviceTranslator=Translator(comp,0,4,0)
FixedData=F0
CmdTranslator=Translator(comp,0,8,0)
DefaultCmd=7E
CmdParms=OBC:8=0
Code.MAXQ610=33 69 11 0e 15 00 15 00 40 00 15 00 bf 02 56 01 ab 00 00 00 42 50 04 30 71 b0 f1
Code.S3C80=43 8B 11 8B 12 95 05 04 08 01 14 01 04 03 48 01 04 24 19 11 94 08 B6 8D 01 46

This is only for the Sunfire Theater Grand II and III preamps. The earlier Grand I models use the NEC1 protocol with signals very similar to Kenwood, as discussed here:
https://www.hifi-remote.com/forums/viewt ... p?t=101129

Not that anyone's likely to ever need this for all the old JP1 remotes, but as it's such a simple protocol, I generated all the other versions too.

[Sunfire]
PID=01 91
DevParms=Device Code:4=0
DeviceTranslator=Translator(comp,0,4,0)
FixedData=F0
CmdTranslator=Translator(comp,0,8,0)
DefaultCmd=7E
CmdParms=OBC:8=0
Code.MAXQ610=33 69 11 0e 15 00 15 00 40 00 15 00 bf 02 56 01 ab 00 00 00 42 50 04 30 71 b0 f1
Code.S3C80=43 8B 11 8B 12 95 05 04 08 01 14 01 04 03 48 01 04 24 19 11 94 08 B6 8D 01 46
Code.HCS08=20 15 23 46 11 95 05 04 08 01 14 01 18 03 48 01 18 24 19 11 94 08 CA CC FF 5F
Code.6805-C9=0C 1A 11 20 12 F4 D8 08 14 04 08 01 AA 01 AA 18 EB 53 06 C9 02 00 3F CC 01 80
Code.6805-RC16/18=11 24 11 20 10 95 05 04 08 00 89 8C 10 A3 8C 12 16 00 84 C9 65 CC 01 A5
Code.740=0C 19 11 80 12 F4 D8 08 14 04 08 01 FC 01 FC 12 16 53 09 A8 02 00 3F 4C 00 FF
Code.SST=11 24 11 20 10 95 05 04 08 00 89 8C 10 A3 8C 12 16 00 84 C9 65 CC C0 25