Page 2 of 2
Posted: Tue Dec 29, 2009 8:19 pm
by cin3000
What code do I use for my TV? That's what I'm wanting to use more.
Posted: Tue Dec 29, 2009 8:30 pm
by cin3000
0000 did not work for the VCR following the directions you said.
Posted: Tue Dec 29, 2009 8:33 pm
by mdavej
Patience, Grasshopper. These steps are necessary. When we confirm what codes partially work, we can determine all the other codes. No one knows the TV codes yet. So please tell us if VCR 0000 and 205 worked first.
Posted: Tue Dec 29, 2009 8:38 pm
by vickyg2003
VCR 0000 Should give you control of your Emerson TV/VCR Combo EW-1301. What functions are you missing for the TV portion?
Posted: Wed Dec 30, 2009 8:21 am
by cin3000
0000 and 205 DID NOT work.
Posted: Wed Dec 30, 2009 8:50 am
by vickyg2003
Cin, since VCR 0000 is not working, I'm afraid that you might have a defective remote or that the infrared recieiver on the TV/VCR unit is not working. You can check to see if the remote is sending signals by looking at it throught a digitial camera, like the one ony a cell phone. The Ir emitter should appear "light up" when you press a button while viewing through the digitial camera.
Since we have an upgrade in the files section for an Emerson TV/vcr combo model ew1301 which matches VCR 0000, I'm pretty sure we have the right codes.
Posted: Wed Dec 30, 2009 9:12 am
by cin3000
I tried looking at my remote from my cell phone and it does appear to 'light up'
I have a working remote but the codes aren't working. What other options do I have?
Posted: Wed Dec 30, 2009 1:25 pm
by vickyg2003
I tried looking at my remote from my cell phone and it does appear to 'light up'. I have a working remote but the codes aren't working. What other options do I have?
Since I found an exact match on the model number on your TV/VCR combo in our files section, and that upgrade matches the VCR/0000 found in your remote, and since your remote's IR emitter is lighting up when a buttton is pushed, and your TV/VCR is not responding, leads me to believe that your IR Receiver in the TV/VCR may be malfunctioning. I don't think that any remote would work with this unit without a repair.
I think your only option is to move on to the Panasonic TV/VCR. What model is the Panasonic?
Posted: Wed Dec 30, 2009 4:46 pm
by cin3000
My Panasonic TV/VCR combo's model number is PV-C-1322 and it was manufactured in June of 2002.
Posted: Wed Dec 30, 2009 8:36 pm
by vickyg2003
I couldn't find anything with an exact match for that model. That remote doesn't have much Panasonic support built in either. That would be my first guess for the TV/VCR combo. But try all the Panasonic TVs and all the Panasonic VCR codes listed and look for any functionality.
Try TV/0250 first. Any reaction from your TV at all?
Re: Radio Shack 6-in-one Smart A/V Remote
Posted: Tue Feb 07, 2012 3:05 pm
by eferz
cin3000 wrote:1. Device: Emerson EWC1301
4. JP1/UEI Remote model: 15-1994
Just in case you get a cable, I found a match and recorded the IR signals with the JP1 tools to create the respective files.