Sky Plus - PACE TDS850NS

Post by **The Robman** » Wed Feb 11, 2009 12:55 pm

I don't know. I don't see anything wrong with your RV file.

dodochicco · Post by **dodochicco** » Wed Feb 11, 2009 1:01 pm

What else can I try?

It would be great if you could help me...

Is there any other option or anything else that I have to check before saving the file?

I hope you have any suggestion.

Post by **The Robman** » Wed Feb 11, 2009 2:34 pm

Finish making your changes to the RM file then post that, then I'll convert it to an RV file.

dodochicco · Post by **dodochicco** » Wed Feb 11, 2009 3:10 pm

I think I've just found what I was doing wrong. I was saving the file as S2002 without changing the setup code in the setup tab.

I'll let you know if I was able to finish doing all the buttons in the remote and I'll hopefully post the result!

Thank you very much for your help Rob!

Post by **The Robman** » Wed Feb 11, 2009 4:05 pm

Yup, that would do it. You should NEVER change the name of the binary file created by RM or it won't work.

dodochicco · Post by **dodochicco** » Wed Feb 11, 2009 4:31 pm

Now I have done both the RM file and the BIN file but I have another problem. Everything looks ok, but none of the buttons where I changed the functions works anymore. It's strange because I made a few experiments and everytime I changed the functions assigned to a certain button that button stopped working, even if looking at Remote Master everything looks ok. I mean that the values in the functions tab are the same as before, but the button doesn't work.

Do you have any ideas?

I am sorry to bother you again Rob, hope you can keep helping me.

Post by **The Robman** » Wed Feb 11, 2009 4:50 pm

I'm going to have to see your RM file in order to diagnose it.

dodochicco · Post by **dodochicco** » Wed Feb 11, 2009 5:20 pm

This is the first edited RM version of the file you uploaded.
https://www.hifi-remote.com/forums/dload ... le_id=6241

I only removed (successfully) the PAGE UP and PAGE DOWN buttons and I assigned to the EXIT button the same function as the INFO button. The problem is that when I hit the INFO button it works properly, but when I hit the EXIT button (which should do the same function as the INFO button) nothing happens.

Here you can find the BIN version of the same file.
https://www.hifi-remote.com/forums/dload ... le_id=6337

If you solve me this little problem I can edit the whole of the remote control.

Thank you for your help Rob.

Post by **The Robman** » Wed Feb 11, 2009 9:16 pm

I have made the button changes that you requested here...

RV BIN:
https://www.hifi-remote.com/forums/dload ... le_id=6337

RM file:
https://www.hifi-remote.com/forums/dload ... le_id=6241

dodochicco · Post by **dodochicco** » Thu Feb 12, 2009 2:10 am

Why when I save the file to .bin all the functions that I changed don't work anymore? Did you find anything wrong in my file?

All I ask you, and I promise this is the last thing I'll ever ask you, is if you can make me a working .bin version of this RM.
https://www.hifi-remote.com/forums/dload ... le_id=6241

This is the .bin version of the same RM file.
https://www.hifi-remote.com/forums/dload ... le_id=6337

The changes I made to the file you sent me last night are the following:

1. Added a fast forward button
2. Added "primafila" function (this one works already, I don't know how I did it)
3. Added a tv guide button

The codes in the functions tab next to the two new buttons are good, i.e. they were working in the first version you sent me a couple of days ago, but they were assigned to the wrong buttons.

Also I don't understand why when I use the version of the remote I just uploaded the EXIT button is freezed, i.e. I cannot even click on it, but in the RM file it looks ok!

If you make these two little changes we'll finally have a working version of Sky Plus HD Italy that you can post in the forum.

I hope you are still able to help me. If you can't help me anymore just explain me how to do it or what I am doing wrong and I'll do it.

Best regards.

Post by **The Robman** » Fri Feb 13, 2009 8:55 am

I just tried creating a bin from your RM file and my bin looks exactly the same as yours.

dodochicco · Post by **dodochicco** » Fri Feb 13, 2009 11:15 am

I think that there is something wrong in the way I save the file then.

Can you please post the .bin file in the upload section and send me the link to it?

I think that yours might work, as all our .bin files look the same but mine don't work while yours do work!

Thank you for your help.

Best regards.

Post by **The Robman** » Fri Feb 13, 2009 11:47 am

OK try this, I changed it to 2002 just to be sure it's different:
https://www.hifi-remote.com/forums/dload ... le_id=6234

dodochicco · Post by **dodochicco** » Thu Feb 19, 2009 10:56 am

Hello Rob.

I am sorry that I didn't reply earlier to you, but I was away from home for a few days without internet access.

I tried the last file you uploaded, but no success. It is exactly the same as mine.

I don't know what else to try to make it work properly. It seems like when I delete a few buttons in the RM file something goes wrong with other buttons.

You don't have any explanation for this, do you?

I would like to thank you very much for all your help in trying to solve this issue, even if we haven't got to a final working version. If you can't help me anymore I'll keep the S2001.bin version though it's a bit messy as some buttons are assigned to the wrong function. If any member of the forum wants to help me I'll appreciate it.

Best regards.

dodochicco · Post by **dodochicco** » Wed Mar 04, 2009 6:58 am

I've got it!

The problem was that I had to use a new file name for every upgrade.

Now I finally managed to get a completely working version for MySky HD Italy decoder. It is only missing the coloured buttons, but it has everything else, including the Sky Plus buttons to record tv shows!

I uploaded the final version here: https://www.hifi-remote.com/forums/dload ... le_id=6337

Many thanks to Robman for helping me understand better RM and all its features.