JP1 Remotes

Cool, here's the KM file:
http://www.hifi-remote.com/forums/dload ... le_id=6182

Here's the RM version:
http://www.hifi-remote.com/forums/dload ... le_id=6183

And here's the PB version:
http://www.hifi-remote.com/forums/dload ... le_id=6184

This version uses a little bit of assembler, so there's no HCS08 or SST code included.

Rob, I'm not quite sure what your code does, but I attempted to translate your upgrade for the JP1.2 remotes. I don't have a s380+ remote here to compare the output, but at least it doesn't crash the remote.

I have updated the PB file Rob posted to include an HCS08 version.
Same link:
http://www.hifi-remote.com/forums/dload ... le_id=6184

I also added a version for 6805RC16/18 that should also work for SST (JP1.1) processors. Vicky, you missed a trick that Rob used in his version. The PF0 byte needs to be $B6 to prevent the third fixed byte from being transmitted. (PB by default assumes you want to transmit all the fixed bytes.)

Thanks Mike, I did miss this, simply because I have no idea what he was doing. But now that I know the trick, the MOV instruction makes sense.

Shorten the bytes of fixed data so that you can change them on the fly depending on a bit that is set in the cmd data.

Vicky,
There are a few tricks of the trade that, once you get used to how PB works and how the IR engine works, you use to make it do what you want.

In this case, I knew that I only wanted 2 fixed bytes to be sent, but I wanted a 3rd fixed byte in the executor for the alternate device code.

I have two choices how to do this.

I could select 3 fixed bytes right from the start in PB, which I know will set the data block options to "all fixed bytes", and then in the assembler, I would reduce R10 by 1.

Or...

I could select 2 fixed bytes in PB, which I know will set the data block options to "2 fixed bytes". Then once I've created the assembler, I manually change the fixed bytes from 2 to 3 without changing the data block. I do this knowing that the IR engine will ignore the 3rd fixed byte without me needing to do anything else.

I determined that the 2nd approach used less executor bytes, so that's what I did.

There are a few tricks of the trade that, once you get used to how PB works and how the IR engine works, you use to make it do what you want.

Yep, but getting used to how PB, KM and the IR engine work is driving me crazy!

I can't imagine how you guys ever came up with PB & KM in the first place!

Rob,

I just got one of these remotes and have some more learns to add, whenever you get a chance. I couldn't figure out how to do it myself. There is also a duplicate command that should probably be removed. Select and Mouse Up have the same code. Both do Mouse Up, so Select can probably be deleted. I don't see anything like Select on the remote.

Thanks

I decoded your learns and they match the existing numeric buttons, which seems weird. Does this remote have numeric buttons? At any rate, here's a list that shows which numeric button should work each of the functions that you learned:

0 = Switch Windows
1 = Tab
2 = Up
3 = Start
4 = Left
5 = Enter
6 = Right
7 = Open
8 = Down
9 = Esc

I just took another look at the OEM remote and I see that these buttons are in fact the numeric buttons:

Sorry about that. I mistakenly thought numlock actually caused the remote to send different signals from those buttons. It must actually switch something in the USB driver to interpret them differently. Thanks for taking a look at it.

This is a great, cheap way to control a pc with a remote. Only $11, but shipping takes a while.

Incidentally, I tried some unused OBC's, looking mainly for alpha keys, but many caused some very strange things to happen, so I gave up.

I was hoping some one could help me with this protocol:
http://www.hifi-remote.com/forums/dload ... le_id=7241
for this remote:
http://www.dealextreme.com/details.dx/sku.27596

After the protocol is found i would like to search to see if there is unlisted codes for other keys ie ABCDEFG...


Thanks!
Nathan

HERE's the KM version, and HERE's the RM version. I have the same remote. These upgrades work beautifully.

I've tried nearly every code without success, also trying to find A, B, C, etc. It only made my PC do very strange things, so I gave up. It wouldn't hurt for someone else to give it a try though. Let us know if you find anything.

Thank you for your help, I will try this is the next 24hours.

FYI, I also found this regarding the the remote:
http://www.xbmc.org/forum/showthread.ph ... eme&page=2

Interesting thread. Contrary to the issues other's have had using this remote with lirc, you'll be happy to know Rob's combo protocol works the mouse perfectly. The only difficulty is finding a good way to use it on a universal remote. Since the original mouse control pad is 8-way, it doesn't translate well onto the 4-way layout on most remotes. I ended up using just up/down/left/right and that works pretty well, although it's a little awkward.

FYI, HERE's the original thread about the development of this upgrade.

Something else I learned through trial and error was how the ABCD hotkeys worked. The instructions say that each can send any of 3 key combinations. A, for example, sends Ctrl+Alt+A, Ctrl+Alt+1 or Ctrl+Alt+F1. I couldn't figure out how to tell it which of those 3 to send. Well the fact is that each button sends all 3 hotkeys at once. For example, pressing A sends Ctrl+Alt+A, Ctrl+Alt+1 and Ctrl+Alt+F1 all at the same time. So they're basically giving you a choice of keys, but you wouldn't ever use more than 1 in each group of 3. I did a little experiment and made 3 different shortcuts using Ctrl+Alt+A, 1 and F1, and they all opened at the same time from just a single press of the A key.

I’m doing something wrong...
I successfully used this on my 15-2104 remote but now I need it to work on my URC-10820 remote, and I just can’t make it work. I’m cutting and pasting the protocol that I think is correct into KM:

Upgrade Protocol 0 = 01 FF (HCS08) Custom Protocol for Cable/2000 non-name USB combo (KM v9.17)
20 16 22 46 31 B6 45 05 07 00 9B 01 8B 00 9B 00
91 18 06 05 E6 02 E9 05 01 63 03 4E 62 60 CC FF
5F
End

And the device code is:

Upgrade Code 0 = 0F D0 (Cable/2000) non-name USB combo (KM v9.17)
FF 00 FE E0 7C E1 00 00 40 38 12 32 0A 1C 3C 02
14 34 0C 62 6A 1A 72 7A 42 48 01 09 11 19 01 54
54 6C 7C 5C 68 74 64
KeyMoves
95 F0 04 07 D0 22 23«A»¦96 F0 04 07 D0 2C 33«B»
¦97 F0 04 07 D0 24 F3«C»¦99 F0 04 07 D0 28 53«D»
¦83 F0 04 07 D0 48 50«close» ¦B1 F0 04 07 D0 52
A0«Fullscreen»
End

What am I doing wrong?

Thanks, ronmon