Page 2 of 2
Posted: Sun Dec 21, 2008 11:58 am
by greenough1
The IR file that you linked above I believe Rob might have updated in place. Download it (don't overwrite your local copy) and try it.
jeff
Posted: Sun Dec 21, 2008 12:19 pm
by dreamy
LOL
I had the wrong fille thanks jeff
the bad news is it still dont work
it all looks right now
the protocol 173 and all looks correct and 1561 key on sat
but no keys are working
Posted: Sun Dec 21, 2008 1:49 pm
by The Robman
Then I'm all out of ideas.
Posted: Sun Dec 21, 2008 2:16 pm
by Mark Pierson
This is a long shot but I see the Fixed Data is different between the .wav file (01 22 90 00) and Rob's upgrade (00 22 90 00).
Try editing the device in IR:
- on the Devices tab select SAT: 1561
- click the Edit button
- in the Upgrade Device window, change the 7th byte from "00" to "01" (73 00 FC FE FE E1 00 becomes 73 00 FC FE FE E1 01)
- click OK
- upload to the remote and test
Posted: Sun Dec 21, 2008 2:49 pm
by The Robman
That's the toggle bit, it must have got dropped when I converted from KM to RM.
I have updated the files.
RM file:
https://www.hifi-remote.com/forums/dload ... le_id=6028
IR file:
https://www.hifi-remote.com/forums/dload ... le_id=6031
Posted: Sun Dec 21, 2008 3:56 pm
by dreamy
MAGIC MAGIC
Spot On
i was just about to give in there
still a few keys misplaced what is the best way to do this can i edit them myself with that RM file there is no exit button will i have to learn this and transfer to RM whats the best way
Thanks again Everyone
Posted: Sun Dec 21, 2008 4:18 pm
by The Robman
I'll fix the file for you, but here's what you'll need to do...
1) make a list of all the functions that are on the wrong button
2) learn all the buttons that are not included in the upgrade and post the file
Posted: Wed Dec 31, 2008 7:26 am
by dreamy
OK
Thanks Rob and everyone who helped
i have managed to get all the keys sorted now
do you know of anyone in the uk who sells the jp1.2 interface
as i have a version 4 remote to do next
i built the jp1 ver and seems to work great
thanks Again and Happy New Year
Posted: Wed Dec 31, 2008 8:29 am
by The Robman
AFAIK, all the JP1 vendors ship to the UK, but there isn't a vendor based in the UK.
And if you're done with your upgrade, please remember to load a copy of it into the file section and then post a link to it here (so people doing a search will find it).
Posted: Sun Jan 04, 2009 7:45 am
by dreamy
Thanks Again
Posted: Thu Jan 27, 2011 11:48 am
by geri_kerschi
Hi,
i habe a problem with the exit (lame) button.
When i open the DM remote i see 39730-B00-00.
But when i read the DM remote data with IR, then i get the info, that my remote is an OUKAOUK1 (39730-B02-00).
OK, i use the ufs910 v3 file.
With this file i can use the DM remote with my ufs910.
But the exit button has no funktion.
How i can program this button?
Best Regards
Geri