Page 2 of 2
Posted: Fri Dec 28, 2018 1:23 pm
by alanrichey
Just Google it. You don't need me to tell you that
Posted: Fri Dec 28, 2018 1:55 pm
by Quovadisuk
alanrichey wrote:Just Google it. You don't need me to tell you that
Where then do you go if all links seem to refer you back to the website that no longer works as previously discussed ? ( even when you google it )
Posted: Fri Dec 28, 2018 2:19 pm
by alanrichey
OK, I give up, I'll do it for you. Google "Slingplayer Desktop'. Top of the list is the Slingbox.com Player URL
https://www.slingbox.com/Products/SlingplayerApps.aspx
Go there, scroll down to Desktop Apps and download it.
Posted: Fri Dec 28, 2018 8:44 pm
by Megallos
I also have a pro-hd and have tried to upload custom bin file using the slingplayer desktop software with no success, hope someone finds a solution to this and I will update should I find a work-around
Posted: Fri Dec 28, 2018 9:50 pm
by Megallos
OK I've done it and this is what you do...
I had to use the original slingplayer software Version 2.0.4, after you go to the custom option....
In the custom field type the name of the file (without the .bin extension)
Click the Power button, and the Slingbox Setup Assistant locates the file in the SBAV folder and copies it to your Slingbox. Then it sends a power signal to your video source. Your device should turn on (or turn off, if it is already on).
Once that’s done, you’re good to go then just finish the setup.
Cheers
Posted: Sat Dec 29, 2018 7:56 am
by Quovadisuk
Alan . As I have said before ,this site doesnt work anymore it just flashes on and off ???
Posted: Sat Dec 29, 2018 8:02 am
by alanrichey
Can't help then, it works fine for me so there must be a problem with your PC.
Posted: Sat Dec 29, 2018 12:34 pm
by Quovadisuk
Megallos wrote:OK I've done it and this is what you do...
I had to use the original slingplayer software Version 2.0.4, after you go to the custom option....
In the custom field type the name of the file (without the .bin extension)
Click the Power button, and the Slingbox Setup Assistant locates the file in the SBAV folder and copies it to your Slingbox. Then it sends a power signal to your video source. Your device should turn on (or turn off, if it is already on).
Once that’s done, you’re good to go then just finish the setup.
Cheers
Hi , I have been trying this with no success ...I am using the version 2-0.4 and have copied the bin file to sbav folder , but when I enter the code its saysit cannot find the entered code? I have restarted both the software and laptop and checked the bin file is there but still no go ?? any ideas ??
Posted: Sat Dec 29, 2018 3:36 pm
by Megallos
just type "Cxxxx" depends on file,
use capital letter if necessary depends on file name,
then press the power button not the enter key
good luck and Merry Christmas
Posted: Sat Dec 29, 2018 3:58 pm
by The Robman
Quovadisuk wrote:
Alan . As I have said before ,this site doesnt work anymore it just flashes on and off ???
That site still works, I was just there.
Posted: Sat Dec 29, 2018 5:34 pm
by The Robman
Here's a direct link to version 5.0.0.83 of the Windows SlingPlayer Desktop app:
http://download.slingmedia.com/Slingpla ... 0.0.83.exe