Page 2 of 5
Posted: Tue Aug 29, 2017 1:56 pm
by The Robman
Duel76 wrote:Thanks for your hel, my device are:
TV Sharp Lc40LE343
Decoder sat ITI nBox 5800SX
blyray samsung BD5300
Cobra Cigno HD
Dvd recorder Lg RH7500
Vcr JVC 6611
is there these codes in this data base?
Did you try looking for any of these yourself? We'll help you all we can, but you have to do some of the work here. (And note that you don't usually need to find an exact model match as most manufacturers use the same code for all of their models).
Also, in the event that we don't have a file for some of your devices, or if the file we have is missing a few buttons, your Nevo is a learning remote, so you can use it to learn the signals from the original remotes and then use that info to build a new upgrade file, which you can then add to the file section to help the next guy.
Posted: Tue Aug 29, 2017 2:11 pm
by vickyg2003
Rob, when you cleaned up this thread, you accidentily deleted the link to the new RDF that Graham posted.
http://www.hifi-remote.com/forums/dload ... e_id=14653
I went looking for it, and put it in my RDF folder and tried to open Duel76's 8600.ir file to see what Graham saw, but apparently there is some trick to opening a raw dump of this remote in RMIR.
Graham is stating that some of these were already in Duel76's remote as device upgrades.
Posted: Tue Aug 29, 2017 2:18 pm
by Duel76
Yes, i have a home theater and another room with tv, dvd recorder, bluray, decoder and vcr, i have also xsight 8620 but it is programming with ez_rc
Posted: Tue Aug 29, 2017 2:47 pm
by The Robman
Posted: Tue Aug 29, 2017 7:04 pm
by vickyg2003
The Robman wrote:
I couldn't find these 2, so you could try learning these:
Decoder sat ITI nBox 5800SX
Cobra Cigno HD
From what I understood from Graham's post, the Cobra Cigno is already in the NEVO as an upgrade.
Open the device upgrade,
Click SAVE AS,
Name it Cobra Cigno
Open your Xsight RMIR or if you haven't created one, start with a download from the Xsight,
Create a NEW Cigno Device,
and then OPEN the file you saved from the NEVO.
Make any button assignment changes you want.
Upload to the Xsight
Posted: Wed Aug 30, 2017 6:58 am
by Duel76
hi, thanks for the help, the tv sharp code not works, but the others codes yes, how do I create a code with the learning function?
Posted: Wed Aug 30, 2017 7:15 am
by Duel76
the decoder has another name, that is Neovision 5800SX, in EZ-RC was in database, but for error,i have delete this code, so i must to create a code with lerning signal, but how do create a code for this device?
Posted: Wed Aug 30, 2017 7:51 am
by vickyg2003
Use your remote to teach the
Decoder sat ITI nBox 5800SX codes to your remote.
Upload your RMIR file to the dignosis section, and we can give you step by step directions or we can create an upgrade for you.
Posted: Wed Aug 30, 2017 9:38 am
by The Robman
Duel76 wrote:hi, thanks for the help, the tv sharp code not works, but the others codes yes, how do I create a code with the learning function?
Check the wiki (link at the top of this page), specifically
this article.
Posted: Wed Aug 30, 2017 11:52 pm
by Duel76
ok, i copy the original device on Nevo with lerning function and then upload the signal
Posted: Sun Sep 03, 2017 1:08 am
by Duel76
Good day to all, I wanted to know if it is possible to copy the codes from a meliconi remote control mod. Universal 5 Web to a remote control nevo c2 or xsight. Is possible?because it has a connection to pc
Posted: Sun Sep 03, 2017 10:07 am
by The Robman
Duel76 wrote:Good day to all, I wanted to know if it is possible to copy the codes from a meliconi remote control mod. Universal 5 Web to a remote control nevo c2 or xsight. Is possible?because it has a connection to pc
I didn't understand the first half of that, but if the net result is that you have something that sends an IR signal, then yes, you can learn that signal using your Nevo and we can take it from there.
Posted: Tue Sep 05, 2017 5:10 am
by Duel76
Hi everyone, no, I wanted say that, I have a universal remote control Meliconi mod. Universal 5 web, which has a pc connection, wanted to know if was possible to download the codes from him and upload to a nevo c2. Is possible?and do you know the Meliconi universal remote controls?
Posted: Tue Sep 05, 2017 5:17 am
by Duel76
Hi, I also have the same problem with a Sharp TV, it quietly captures the IR signal, but it does not work well
Posted: Tue Sep 05, 2017 8:06 am
by mdavej
Duel76 wrote:Hi everyone, no, I wanted say that, I have a universal remote control Meliconi mod. Universal 5 web, which has a pc connection, wanted to know if was possible to download the codes from him and upload to a nevo c2. Is possible?and do you know the Meliconi universal remote controls?
Here is the manual for the Meliconi remote. It looks like the only way to transfer codes to Nevo would be to learn one at a time like Rob said earlier.
http://guida.meliconi.com/page.php?idpag=47&idtele=3