Page 8 of 8
Posted: Wed Nov 21, 2012 10:51 am
by The Robman
vickyg2003 wrote:A long time ago someone pointed me to the learn format, but I don't know where the post is.
This document describes the learned format:
http://www.hifi-remote.com/forums/dload ... le_id=3628
Posted: Wed Nov 21, 2012 10:59 am
by cauer29
And here's one that fills in much of the info completely missing from that one:
http://www.hifi-remote.com/forums/dload ... le_id=9768
A.A.
Posted: Wed Nov 21, 2012 11:45 am
by vickyg2003
Thanks Rob and cauer29. I thought I had seen that at one time or another, but I couldn't find that.
Cauer29, I THOUGHT it was you that filled me in on learns, but I couldn't remember and couldn't find the link. But that was what I had remembered.
I updated the Useful Remote Links in the General forum with those 2 links so that I can find them again.
Thanks again.
Posted: Wed Nov 21, 2012 12:39 pm
by Eitnot
I eventually applied the Fast Macro patch but I had this patch on the working one too. This is a used remote I got off eBay so cannot say if the previous owner did anything crazy.
Posted: Fri Dec 21, 2012 8:41 pm
by Eitnot
Just as a heads up in case someone else runs into this problem I bought another non backlit remote off ebay and that one works without problem. I took all 3 remotes apart and the two that work look like they may have been done by a different manufacturer. The two that worked had this info on the PCB:
Atlas OCAP 2007,
URC-1056BA1-XXX-XXX-XXXX-XXX-R
REV:00 October 04 2007
RoHS
UEI ATLAS OCAP Non-Backlit 2007
w/Samsung 64K,
URC-10566BA1-XX-XXX-XXXX-XXX-R
REV:01 March 21, 2007
RoHS
The remote that I could not get to work had this info on the PCB:
UEI ATLAS DVR OCAP
URC-1056BG1
Dec.2006 REV:04
Feb 27, 2007
LT-1
0711