slingbox solo code for triax st-hd 537

mickodwyer · Post by **mickodwyer** » Thu Jun 23, 2011 1:12 pm

have tried and failed to find anything... maybe my set up is faulty

alanrichey · Post by **alanrichey** » Thu Jun 23, 2011 11:59 pm

Need a LOT more information than that if you want us to help

1. Have you tried the 2 Triax remotes in the File Section ?
2. Have you tried all the Triax selections in the Slingbox setup ?

mickodwyer · Post by **mickodwyer** » Fri Jun 24, 2011 12:30 am

thanks for the promptness in replying,,,yes i will follow inrtuctions re these two other receivers and see how i go.!!

mickodwyer · Post by **mickodwyer** » Fri Jun 24, 2011 12:48 pm

on further consideration after failing with the code you suggest ,
ive a slingbox solo and it seems that as my triax is a hd. set i will equally have to upgrade the slingbox to a hd model...
thanks ever so much...

alanrichey · Post by **alanrichey** » Fri Jun 24, 2011 8:29 pm

Totally irrelevant. If it doesn't work on a Solo it won't work on the Pro-HD. Don't waste your money.

And please go back and check the README files and give me a proper answer, instead of '...failing...'

mickodwyer · Post by **mickodwyer** » Sat Jun 25, 2011 3:34 am

thanks and i appreciate straight talking

PRESENT STATE:
i have a grundig slingbox receiver with dish etc poin ting to astra 28. and getiing my 120 free channels etc . its fta and i pay murdock nothing.

connected i am to a sling box solo and modem and i receive said channels outside the country
all works well .....

PROBLEM.
IRISH TV CHANNELS ARE NOT INCLUDED ON THAT LIST, BECAUSE UNTIL SOME MONTHS AGO WE WERE TERRESTRIAL TV ONLY,AND NON DIGITAL.

SOLUTION.

ireland is now gone digital in the last few months

there are boxes available to convert the old terrestrial aerials to digital hd reception.
fine...

TRIAX HAVE COME UP WITH A COMBI BOX......ie combines and converts the terrestrial signal to digital and combines this into a satellite receiver as well.

this is my solution...i thought..so ..

IN MY CASE.....this triax receiver converts the terrestrials channels perfectly .... but SLINGBOX SOLO failS to get codes for it... i have read your documentation......got those downloaded code files into the folder for SLINGBOX setup to dig them out...
no joy...!! i use the code for example V2010 and STANDALONE DVR as device

that is the state of play .. thanks michael

alanrichey · Post by **alanrichey** » Sat Jun 25, 2011 3:48 am

But you STILL haven't answered any of the questions I pose in the README file...

mickodwyer · Post by **mickodwyer** » Sat Jun 25, 2011 7:47 am

phew
answering according to list...!

1...no error mesages

2 minutes

3...no buttons worked

4 ir works fine with the skydigibox ...ie changes channels and on / off

5 triax window is like a hoodlum window blacked out
3 little blue lights left corner ..placed all over the place.

did not visit 6 site!!!

thanks...

alanrichey · Post by **alanrichey** » Sat Jun 25, 2011 10:28 am

Good, now we at least know the problem is with the code itself.

I couldn't track down the 537 but I found the 527.

https://www.hifi-remote.com/forums/dload ... le_id=9713

Any good ?

mickodwyer · Post by **mickodwyer** » Sat Jun 25, 2011 1:17 pm

THE 537 IS THE COMBI MODEL TERRESTRIAL CONVERTING AND SATELLITE COMBINER...
NO LUCK ... I HAVE WRITTEN TO TRIAX SUPPRT FOR THEM TO TELL ME EXAXCTLY WHERE THE IR SENSOR IS GEOGHAPHICALLY LOCATED

THANKS MICHAEL

mickodwyer · Post by **mickodwyer** » Mon Jun 27, 2011 6:22 am

support have told me the exact place to put my ir sensor .... who knows i may be lucky...!!!

mickodwyer · Post by **mickodwyer** » Tue Jun 28, 2011 12:53 pm

its bang on centre of display window on receiver and still no luck.....thinking.....

JP1 Remotes

slingbox solo code for triax st-hd 537

slingbox solo code for triax st-hd 537

slingbox codesfor a triax receiver

codes....

sling solo codes

slingbox solo codes

slingbox solo