JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

WORKING power discrete codes for Pioneer DVR-533H?

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Discrete Codes
View previous topic :: View next topic  
Author Message
jamaroney



Joined: 26 Feb 2011
Posts: 11

                    
PostPosted: Sun Apr 24, 2011 6:51 pm    Post subject: WORKING power discrete codes for Pioneer DVR-533H? Reply with quote

I have tried all the remotes on this site for Pioneer DVRs, and while many of them have discrete on/off buttons, when I load them the off button functions as a toggle on/off and the on button does nothing (or the opposite - I get confused...).

Are discrete power codes for that unit simply nonexistent?

I'm a newbie, and use RemoteMaster 2.01. Thanks for any help to be offered.
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Sun Apr 24, 2011 8:10 pm    Post subject: Reply with quote

Pioneer has the codes for your PVR.

The discrete codes listed there match this upgrade.
Back to top
View user's profile Send private message
jamaroney



Joined: 26 Feb 2011
Posts: 11

                    
PostPosted: Sun Apr 24, 2011 9:45 pm    Post subject: Reply with quote

Thanks, but that's one of the ones I tried earlier. I just tried it again - it works as I described in my earlier post.
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Sun Apr 24, 2011 9:56 pm    Post subject: Reply with quote

Well, I suppose that it's possible that Pioneer doesn't know their own IR codes, but probably a better bet it that something has gone wrong in uploading the upgrade. How about posting your RMIR file in the Diagnosis Section, and posting a link to it here?
Back to top
View user's profile Send private message
jamaroney



Joined: 26 Feb 2011
Posts: 11

                    
PostPosted: Mon Apr 25, 2011 7:13 am    Post subject: Reply with quote

Here is the link to my RMIR file:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=9629

Correction: my unit is a 531, not 533 as I originally listed. However, my Pioneer manual lists the 531 and 533 together.

Once again, the "Power Off" button toggles power (just like the "Power" button), and the "Power On" does nothing.

All other buttons work fine.
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3365

                    
PostPosted: Tue Apr 26, 2011 12:56 am    Post subject: Reply with quote

I uploaded your RMIR file into a 15-135 (it complains a little, because the checksums are wrong) and it is shooting the 186-188 OBCs that you intended. I suppose that means that the 531 really doesn't have discrete On/Off signals.

I don't have any other suggestions.
Back to top
View user's profile Send private message
jamaroney



Joined: 26 Feb 2011
Posts: 11

                    
PostPosted: Tue Apr 26, 2011 7:05 am    Post subject: Reply with quote

I figured out a workaround for discrete power on - I discovered that the play button turns on the unit (and plays the last thing recorded), so I just set up a macro where "play" is followed by "guide", which stops play and goes right to the main menu.

Thanks for the assistance.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Discrete Codes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control