JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

IR code digicorder/digibox (ADB-7100CX cable box )

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Slingbox
View previous topic :: View next topic  
Author Message
mpistache



Joined: 10 Jun 2008
Posts: 1

PostPosted: Fri Jun 13, 2008 3:55 am    Post subject: IR code digicorder/digibox (ADB-7100CX cable box ) Reply with quote

I need the IR code from the digicorder and digibox used by the provider Telenet in Belgium. The cable corder is a ADB-7100CX.
Nobody in Belgium can help me.
Thanks if you can help me.
Back to top
View user's profile Send private message
binky123
Expert


Joined: 14 Feb 2004
Posts: 1292

PostPosted: Fri Jun 13, 2008 12:15 pm    Post subject: Reply with quote

Based on the info in this thread, http://www.remotecentral.com/cgi-bin/mboard/rc-prontong/thread.cgi?8462,1#1,

In RemoteMaster, select Slingbox model remote, select Dreambox Protocol (01 6C)
Enter device:42, OEM device1=26, OEM device2=47, OEM device3=68 which generates fixed data of 1A 2F 44 2A.

Enter OBCs for your functions, Export BIN.

When finished, upload your .RMDU and BIN file into the Slingbox file section area for future users.

If the 016C protocol doesn't work(inconsistent), it's possible that you may need a slightly modified one that was developed to control a dreambox.
Back to top
View user's profile Send private message
kmeuleman



Joined: 10 Mar 2008
Posts: 11
Location: Belgium

PostPosted: Mon Aug 17, 2009 8:37 pm    Post subject: Telenet RC-RW100 Digicorder Reply with quote

The needed file is here:

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=7083
Back to top
View user's profile Send private message
jpcolin



Joined: 25 Feb 2011
Posts: 2

PostPosted: Fri Feb 25, 2011 4:22 am    Post subject: Reply with quote

I need the HEX codes of this device could someone help me please?
Back to top
View user's profile Send private message
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3482
Location: UK/USA

PostPosted: Sat Feb 26, 2011 2:12 am    Post subject: Reply with quote

I've actually built a full Custom Remote for the 7100 at http://www.hifi-remote.com/forums/dload.php?action=file&file_id=9500

If you just want the HEX codes you can get them from the RMDU file.
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3272

PostPosted: Sat Feb 26, 2011 4:29 am    Post subject: Reply with quote

jpcolin,
Perhaps you want the functions in Pronto Hex format.
Use this upgrade. Load into RemoteMaster, ignore the Setup tab, and find the function numbers for each function. E.g. Power is OBC 22, and the digit 1 is OBC 2.

Use MakeHex and the MakeHexGUI, and the following irp file:
TDC-38.irp is---

Device=18.10
Function=0..86
Protocol=TDC-38
Frequency=38000
Time Base=315 '315 = 12 cycles at 38Khz
Message Time=309
Zero=-1,1
One=1,-1
Prefix=1,-1
First Bit=MSB
Form=;*,D:5,S:5,F:7

Correlate the functions with the function numbers and the corresponding Pronto Hex.
Back to top
View user's profile Send private message
jpcolin



Joined: 25 Feb 2011
Posts: 2

PostPosted: Mon Feb 28, 2011 12:07 pm    Post subject: Reply with quote

how can i open this RMDU file to copy the HEX codes?
Back to top
View user's profile Send private message
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3482
Location: UK/USA

PostPosted: Mon Feb 28, 2011 12:19 pm    Post subject: Reply with quote

Any text editor or RemoteMaster
Back to top
View user's profile Send private message
3FG
Expert


Joined: 19 May 2009
Posts: 3272

PostPosted: Mon Feb 28, 2011 12:44 pm    Post subject: Reply with quote

We tend to overuse terms in the IR community. "Hex" can mean a lot of things.

1) Pronto Hex format codes, which is string of 4 digit hexadecimal numbers which represent the durations of on and off. There are typically 20-50 of these 4 digit durations per function.

2) RemoteMaster contains 1 or 2 bytes of data per function, and JP1ers call that data Hex also, but it is input data to an executor subroutine that calculates the durations.

Do you need Pronto Hex format data? If so, please follow the instructions I posted a couple of posts earlier. You do need to download and install RemoteMaster. But the rmdu file does not contain Pronto Hex formatted data--you'll need to use MakeHex for that.
Back to top
View user's profile Send private message
alanrichey
Expert


Joined: 24 Mar 2008
Posts: 3482
Location: UK/USA

PostPosted: Sat Mar 05, 2011 2:50 am    Post subject: Reply with quote

mpistache: Did this Custom Remote work ?
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Slingbox All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Get Smart! the band's official homepage Rockabilly Central