Need bin code on Moxi DVR for Slingplayer

alanrichey · Post by **alanrichey** » Fri Dec 03, 2010 12:26 pm

There was no equivalent function in the database I used.

If you can go to http://remotes.slingbox.com and create a remote with just learning that button from your original remote, export the remote and send me the myRemote.lrz file I can add it to the Custom one.

shay · Post by **shay** » Fri Dec 03, 2010 12:49 pm

Thank you Alan. I will work it this evening when I get home. Thanks again for your help.

alanrichey · Post by **alanrichey** » Tue Dec 07, 2010 4:14 am

Still waiting for the file to be sent to me

Al

shay · Post by **shay** » Tue Dec 07, 2010 6:34 am

sorry Alan. I have not a chance to add the additional buttons yet. I will get it done this evening or tomorrow.

alanrichey · Post by **alanrichey** » Wed Dec 08, 2010 2:57 am

Got the file, not many buttons were readable but luckily the 'Jump' was so I have the code.

What button do you want it mapped to ?

And do you want any other functions mapped to the colour buttons ?

gaitkeeper · Post by **gaitkeeper** » Wed Dec 08, 2010 2:16 pm

Ahhhh! Awesome! Thanks so much and sorry for the delayed response.

shay · Post by **shay** » Wed Dec 08, 2010 2:30 pm

alanrichey wrote:Got the file, not many buttons were readable but luckily the 'Jump' was so I have the code.

What button do you want it mapped to ?

And do you want any other functions mapped to the colour buttons ?

Isn't there a jump button on the DVR section of the slingbox? The button that I really want mapped is the quick skip button. Were you able to see it?

Thank you,

Shay

alanrichey · Post by **alanrichey** » Wed Dec 08, 2010 2:34 pm

No, there are Skip+ & Skip- (Next/Previous Chapter) and they are mapped to those functions. This 'Jump' or 'Quick Skip' is a different function. Or so I assume, as I have never seen this device.

What does it do differently compared with the Skip + button ?

shay · Post by **shay** » Wed Dec 08, 2010 4:05 pm

This is the button I am trying to get into the remote.

During playback it skips the recorded program forward by 30 seconds. Is the skip forward button mapped in the bin file?[/img]

Post by **vickyg2003** » Wed Dec 08, 2010 4:30 pm

Shay, thanks for posting the picture, I think that may have helped. Alan has recorded a "next" and "back" function from the Harmony database, and he logically them on the page+ and page- buttons. On your picture I see "back" but I don't see a "next" button on your remote, so I'm guessing that the "next" button is really the little "->|" button.

shay · Post by **shay** » Wed Dec 08, 2010 4:58 pm

You're welcome. I think they are mapped from the these buttons

The replay button should be mapped to the button to the left of the record button on the slingbox remote which is called the skip back. Thanks again for everyone's help.

Post by **vickyg2003** » Wed Dec 08, 2010 5:31 pm

If page up and page down are the functioning for track skipping, then are the functions on the skip- and skip+ doing the "replay" and "quick skip" functions?

shay · Post by **shay** » Wed Dec 08, 2010 8:41 pm

vickyg2003 wrote:If page up and page down are the functioning for track skipping, then are the functions on the skip- and skip+ doing the "replay" and "quick skip" functions?

Are you asking about Alan's bin file, or the I one I created through remotes.slingmedia.com.

Post by **vickyg2003** » Wed Dec 08, 2010 9:12 pm

Oh sorry, I was asking about Alan's bin. I'm not a slingbox person, I'm a JP1/protocol person.

shay · Post by **shay** » Wed Dec 08, 2010 9:29 pm

There isn't a chapter skip on the moxi. The forward and next buttons are used to page through message pages.