need help for creating rdf (urc-39931 RJ0 - dreambox v6)

iibm · Post by **iibm** » Sun Nov 14, 2010 3:34 pm

I have a new dreambox (dm 500 hd) that comes with a JP1.2 remote (urc-39931 RJ0).
I think it should be quite close from dreambox v4 also JP1.2 (urc-39930).

IR file is here http://www.hifi-remote.com/forums/dload ... le_id=9136

IR say EepromSize=$2100 ...i will investigate...

rdf+map is here :
http://www.hifi-remote.com/forums/dload ... le_id=9137

How to find buttonmaps and digitsmaps ??

binky123 · Post by **binky123** » Wed Nov 17, 2010 8:55 am

This remote is a JP1.3 remote and also has that odd macro format that has a delay between macro keycodes. iibm is testing out the RDF.

iibm · Post by **iibm** » Wed Nov 17, 2010 4:24 pm

RDF is now working almost perfectly

(previous link is updated !)
thanks for the help !

There is no DigitMaps in the rdf (has i do know how to find this !) but rdf is working well without ....

I've added a map + a jpeg file.

I just have something strange with on key....
i created a device upgrade (with RM) set it in IR and uploaded it :
- under the DREAM device the key back($11) is active (red light on the device blink)
- under the TV device the same key do nothing (no blink) (all other work !).
i've tried to set my device as a SAT device or as a TV device but no change....

under the key labelled "<" ($11) there is another label "AV" that is a tipical TV label, so i find it quite strange...

keymove do not work to....

binky123 · Post by **binky123** » Wed Nov 17, 2010 11:16 pm

Does the manual mention anything about this special BACK key? I recall some remotes with an LCD display treat the Left Arrow key special. Perhaps this is similar.

iibm · Post by **iibm** » Thu Nov 18, 2010 6:48 am

no, nothing special about this key...

asphaltdancer · Post by **asphaltdancer** » Mon Jan 10, 2011 1:40 pm

the Download =>rdf+map is here :
is not working

could someone please reupload this?

Post by **vickyg2003** » Mon Jan 10, 2011 2:05 pm

Apparently this RDF is in limbo. Its being prepared for release. You can download it from here

http://controlremote.svn.sourceforge.ne ... otes/rdfs/

The signatgure is 33063306

xnappo · Post by **xnappo** » Mon Jan 10, 2011 3:13 pm

vickyg2003 wrote:Apparently this RDF is in limbo. Its being prepared for release. You can download it from here

http://controlremote.svn.sourceforge.ne ... otes/rdfs/

The signatgure is 33063306

Yes, sorry - once again the process was supposed to be fast but got held up. In this case by not having the complete set of Bill's new extenders which I should have very soon *cough*

.

xnappo