| View previous topic :: View next topic |
| Author |
Message |
eferz
Expert
Joined: 03 Jun 2010
Posts: 1078
Location: Austin, Texas
|
 Posted: Fri Sep 03, 2010 7:15 pm Post subject: Buffalo DTV-H300 |
 |
|
Tiborg,
I imported your guid.xml into the JP1 tools, and it appears that all of your learns were untested. The result of which I was only able to obtain four clean learns, one dirty learn, and nine malformed learns. Do me a favor and go back through the Betaremotes webpage again and edit your remote profile. This will allow you test each of the buttons and relearn them as necessary.
*** Files deleted due to irrelevance ***
Last edited by eferz on Sat Sep 04, 2010 11:24 am; edited 3 times in total |
|
| Back to top |
|
 |
tiborg
Joined: 04 Sep 2010
Posts: 4
|
| Posted: Sat Sep 04, 2010 1:45 am Post subject: |
|
|
| Strange, I did test every key I created. I'll go through it again to see if that helps. |
|
| Back to top |
|
|
tiborg
Joined: 04 Sep 2010
Posts: 4
|
| Posted: Sat Sep 04, 2010 1:57 am Post subject: |
|
|
| I went through and confirmed each key again, is it showing up any differently now? |
|
| Back to top |
|
|
eferz
Expert
Joined: 03 Jun 2010
Posts: 1078
Location: Austin, Texas
|
|
| Back to top |
|
|
eferz
Expert
Joined: 03 Jun 2010
Posts: 1078
Location: Austin, Texas
|
|
| Back to top |
|
|
tiborg
Joined: 04 Sep 2010
Posts: 4
|
| Posted: Sat Sep 04, 2010 7:01 am Post subject: |
|
|
| So that link is referencing the box and not the remote? It could be cause I'm still on analog service, so I'm using the internal tuner. I'll getting my FiOS TV connection at the end of the week. After that the box will be set to use the DTV-H300's remote by default. |
|
| Back to top |
|
|
eferz
Expert
Joined: 03 Jun 2010
Posts: 1078
Location: Austin, Texas
|
| Posted: Sat Sep 04, 2010 11:19 am Post subject: |
|
|
| tiborg wrote: | | So that link is referencing the box and not the remote? It could be cause I'm still on analog service, so I'm using the internal tuner. I'll getting my FiOS TV connection at the end of the week. After that the box will be set to use the DTV-H300's remote by default. |
It appears that I've made a couple of mistakes. First, I used the wrong GUID and then I shorted the URL. I apologize for that.
Once I used the correct GUID and used the proper URL, I was able to create bins for your to test.
Instructions are inside either zip archive. |
|
| Back to top |
|
|
tiborg
Joined: 04 Sep 2010
Posts: 4
|
| Posted: Sat Sep 04, 2010 10:35 pm Post subject: |
|
|
| Thanks, I'll test it out the next time I have the digital tuner hooked up. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
File Section
Wiki
