View previous topic :: View next topic |
Author |
Message |
e34m5
Joined: 14 Oct 2003 Posts: 675 Location: Atlanta |
Posted: Tue Jan 27, 2004 2:18 pm Post subject: How do I decode this |
|
|
I found this in Remote Central..it's for a Zenith HDSAT520...I'd like to convet this in to JP1.
Power Off
0000 0067 0000 0013 0014 00cc 0014 00cf 0014 0015 0014 00a7 0014 00cf 0014 0015 0014 00a7 0014 0015 0014 00a7 0014 00cf 0014 0015 0014 00a7 0014 00cf 0014 00cf 0014 0015 0014 00a7 0014 0015 0014 00a7 0014 112d
Power On
0000 0067 0000 0013 0014 00cc 0014 00cf 0014 0015 0014 00a7 0014 00cf 0014 0015 0014 00a7 0014 00cf 0014 0015 0014 00a7 0014 00cf 0014 0015 0014 00a7 0014 00cf 0014 0015 0014 00a7 0014 0015 0014 00a7 0014 112d |
|
Back to top |
|
|
johann83
Joined: 03 Aug 2003 Posts: 66 Location: Pittsburgh, PA |
Posted: Tue Jan 27, 2004 2:30 pm Post subject: |
|
|
Looks like a job for IRTool to me. Make sure that you also download DecodeIR.dll and place it in the same directory. You should then be able to cut and paste those commands into the box in IRTool and it will give you information you need to create an upgrade.
If you don't care to go through the trouble, it seems the code you posted gives the following.
Code: | Protocol: Zenith
Device: 6
OBC: 13 (Power off)
1 (Power on)
EFC: 226 (Power off)
34 (Power on) |
Matt |
|
Back to top |
|
|
johnsfine Site Admin
Joined: 10 Aug 2003 Posts: 4766 Location: Bedford, MA |
Posted: Tue Jan 27, 2004 2:52 pm Post subject: |
|
|
If you build that in KM or RM, the "Device" value 6 goes in the "Length" field; The "Style" field should be 0 and "Long REC" doesn't matter since there is no record function.
If your remote happens to have the setup code SAT/1856 (I think only the 6131 and 9960 have it) then all you need are the EFCs for KeyMoves. |
|
Back to top |
|
|
jon_armstrong Expert
Joined: 03 Aug 2003 Posts: 1238 Location: R.I.P. 3/25/2005 |
|
Back to top |
|
|
e34m5
Joined: 14 Oct 2003 Posts: 675 Location: Atlanta |
Posted: Tue Jan 27, 2004 3:14 pm Post subject: |
|
|
I tried the uppgrade for the 1080..the discrete commands did not work.
The decoded values are different than those in the upgrade..I will test them and report.
Ok..I confused IR with IRTool..I get it now |
|
Back to top |
|
|
|