View previous topic :: View next topic |
Author |
Message |
lobonegro
Joined: 26 Jan 2004 Posts: 3
|
Posted: Mon Jan 26, 2004 1:09 pm Post subject: First time with JP! |
|
|
I got myself a Radio Shack 15-2116 and also have a Motorola Cable Box Remote (400 or 450 imposible to tell) both with JP1. I`m trying to control a Sony TV (No problem), a Mitsubichi VCR (No problem), a motorola 2000 Cable box (working fine), a A/B Radio Shack switch box (using the learning mode of the 15-2116), a Extingy from Creative (also using the learning mode). The problem is with my two DVD. The first is a Philco PH9200 which the 2116 don`t have any codes and a Panasonic DVD DMR-E50 with the same problem.
The first question which comes to my mind is How do I know which is the PIN ONE of the two JP1 found in my two remote controls in order not to fry them? (I own the one from Radio Shack, the other belong to the cable company). There are not marks on them.
And also if any one has the codes for the Philco PH9200 and the Panasonic DMR-E50
Thanks
Lobonegro |
|
Back to top |
|
|
gfb107 Expert
Joined: 03 Aug 2003 Posts: 3411 Location: Cary, NC |
|
Back to top |
|
|
Nils_Ekberg Expert
Joined: 02 Aug 2003 Posts: 1689 Location: Near Albany, NY |
Posted: Mon Jan 26, 2004 1:31 pm Post subject: Re: First time with JP! |
|
|
lobonegro wrote: |
The first question which comes to my mind is How do I know which is the PIN ONE of the two JP1 found in my two remote controls in order not to fry them? (I own the one from Radio Shack, the other belong to the cable company). There are not marks on them. |
Just try both directions. You will not fry the remote.
lobonegro wrote: |
And also if any one has the codes for the Philco PH9200 and the Panasonic DMR-E50 | There are all sorts of Panasonic upgrades in the jp1 Device Codes/DVD section but I see nothing for the Philco. Try leaning some comands and downloading them to IR and we can figure out what it matches _________________ Nils
Files Section
Diagnosis File Section |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Mon Jan 26, 2004 1:40 pm Post subject: |
|
|
1. the R/S A/B switch box: the code is VIDACC/0160
2. Panasonic DMR-E50: the code is DVD/0490.
3. Philco PH9200: the code is DVD/0539
4. the plug: normally the cable will flow downwards when it's connected, but try it both ways around to see which works, you won't fry the remote. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
lobonegro
Joined: 26 Jan 2004 Posts: 3
|
Posted: Mon Jan 26, 2004 2:05 pm Post subject: New to JP1 |
|
|
The Robman wrote: | 1. the R/S A/B switch box: the code is VIDACC/0160
2. Panasonic DMR-E50: the code is DVD/0490.
3. Philco PH9200: the code is DVD/0539
4. the plug: normally the cable will flow downwards when it's connected, but try it both ways around to see which works, you won't fry the remote. |
Thanks. I will test them. One more question about the Philco. The code 0539 is from which device?. I don`t know where the Philco comes from. I know that these DVD comes from Brazil, what I don`t know is the real manufacturer. My guess is that probably is Phillips or someone else in China. Anyone has any information because there are a lot of people all around Mexico which will love to know.
Regards
Lobonegro |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Mon Jan 26, 2004 2:45 pm Post subject: |
|
|
AFAIK, "Philco" is short for "Philips Company" _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
wwwoholic
Joined: 28 Nov 2003 Posts: 117 Location: Toronto, Canada |
Posted: Mon Jan 26, 2004 2:48 pm Post subject: Re: First time with JP! |
|
|
lobonegro wrote: | which is the PIN ONE |
look at the pictures in "SERIAL PORT INTERFACE FOR JP1" document at yahoo |
|
Back to top |
|
|
lobonegro
Joined: 26 Jan 2004 Posts: 3
|
Posted: Mon Jan 26, 2004 10:31 pm Post subject: New to JP1 |
|
|
I tested the codes with the following results:
The panasonic DMR-E50 don`t work with 0490 but with the 0632 but it only responded as DVD not as recorder DVD.
The Philco don`t work with 0539 or for that matte, with any other code from the remote library.
I didn't had the oportunity to test the A/B switch.
Any ideas?
Regards
Lobonegro |
|
Back to top |
|
|
gjarboni Expert
Joined: 20 Sep 2003 Posts: 294 Location: Columbia, MD |
Posted: Mon Jan 26, 2004 10:43 pm Post subject: Re: New to JP1 |
|
|
lobonegro wrote: | I tested the codes with the following results:
The panasonic DMR-E50 don`t work with 0490 but with the 0632 but it only responded as DVD not as recorder DVD. |
Learn the additional functions then download from IR. Go to the learned signals tab. Click on the buttons that you learned to. You should see Protocol, Device, & EFC information. If device 0632 works you might be able to use keymoves for the additional recorder functions.
lobonegro wrote: | The Philco don`t work with 0539 or for that matte, with any other code from the remote library.
|
After you are done with the first device, clear out all your learned signals, then learn as many buttons as you can. You should be able to use the information in the learned signals tab of IR to create a device upgrade. Or you compare this information to devices already in the files area of the Yahoo JP1 group and see if there is a device that will work. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Mon Jan 26, 2004 11:27 pm Post subject: Re: New to JP1 |
|
|
lobonegro wrote: | The Philco don`t work with 0539 or for that matte, with any other code from the remote library. Any ideas? |
In that case I will refer you to the main sticky thread in the code search forum. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|