JP1 Remotes

jeajea · Joined: 24 Feb 2010 Posts: 283 Location: USA

I am using a Atlas 1056 with extender 2.10. After some time or unknown key press the backlight feature is disabled. I have tried three different 1056 remotes so I don’t think it is a hardware problem. The IR file (with backlight no longer enabled is here

http://www.hifi-remote.com/forums/dload.php?action=file&file_id=8677

Am I doing something wrong?
_________________
Jim Anderson

unclemiltie · Posted: Thu Jul 22, 2010 9:38 am Post subject:

yea, I've noticed this as well. It's been one of the things that I wanted to try to chase down but I haven't had time.

The only work-around solution is to make sure that you have a key programmed (or the long-setup option) that turns it back on. But something's clobbering the flag that I set to tell the remote to keep it on and I've not been able to figure out what!
_________________
this JP1 stuff is a sickness!

jeajea · Joined: 24 Feb 2010 Posts: 283 Location: USA

How do you program a key to enable or toggle backlight enable?
_________________
Jim Anderson

unclemiltie · Posted: Fri Jul 23, 2010 7:54 pm Post subject:

There are two ways to toggle the backlight setting:

First, there is a setting in IR that determines what a long-press of setup will do. The options are either deactivate the extender or toggle the backlight (on the 1056 only)

Second, the backlight toggle is included as a special protocol that you can assign a keymove to. but you assign a key to that protocol and it will either toggle or force on/off the backlight setting.

Both of these are in the readme that is distributed with the extender.
_________________
this JP1 stuff is a sickness!