I have a number of remotes in my database which use NEC1 Device 0 (No Subdevice), and I want to cross-reference them to a Device Code.
So I want to search by Protocol (with Device Numbers), EFC and Function, as well as by Device Type. For example:
I want to search for a Video device which uses the NEC1 protocol with Dev1 being 0, with the EFC search number being 229 for the Power function.
If a code cannot be found, it can be done without specifying the function.
JP1 device lookup tool - search by protocol, EFC & funct
Moderator: Moderators
JP1 device lookup tool - search by protocol, EFC & funct
"The best thing possible to do with knowledge is to share it".
-
vickyg2003
- Site Admin
- Posts: 7109
- Joined: Sat Mar 20, 2004 12:19 pm
- Location: Florida
- Contact:
Well the information is certainly there, but I don't have any form to do the query.
I can tell you that in my whole database there are only two devices with a power button with an EFC of 229
Video/1444 which is NEC1 8
Video/1083 which is a NEC1 0,254
But of course there might be a NEC1 0, code burried in some combo code.
I can tell you that in my whole database there are only two devices with a power button with an EFC of 229
Video/1444 which is NEC1 8
Video/1083 which is a NEC1 0,254
But of course there might be a NEC1 0, code burried in some combo code.
Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.