I-Link 9000 Code for use on Slingbox Solo

patdescon · Post by **patdescon** » Tue May 25, 2010 7:23 pm

I am having problem setting up my I-link 9000 to my Slingbox Solo. Sling media do not provide i-link as an option on set up. The main issue is the IR remote control feature. Any advice ? Thanks in advance !

alanrichey · Post by **alanrichey** » Wed May 26, 2010 12:36 am

I should be able to build a Custom Remote but I am on holiday till Sunday and didn't bring my 'learning' kit. I'll do it when I get back

Al

patdescon · Post by **patdescon** » Wed May 26, 2010 8:56 pm

alanrichey wrote:I should be able to build a Custom Remote but I am on holiday till Sunday and didn't bring my 'learning' kit. I'll do it when I get back

Al

Thanks Al - enjoy you vacation and I look forward to your help on your return.

alanrichey · Post by **alanrichey** » Sat May 29, 2010 3:43 pm

OK, I've built a test remote at https://www.hifi-remote.com/forums/dload ... le_id=8472

Please let me know how you get on.

alanrichey · Post by **alanrichey** » Tue Jun 01, 2010 1:30 am

Any luck with this Custom Remote ?

patdescon · Post by **patdescon** » Tue Jun 01, 2010 6:01 pm

alanrichey wrote:Any luck with this Custom Remote ?

Hi Al
Thanks for customizing the remote. Excuse my lack of knowledge - after I download and unzip the file on my desktop where and how do I load it ?
Please forgive my ignorance and thanks again for all your efforts.

Post by **The Robman** » Tue Jun 01, 2010 7:26 pm

patdescon wrote:
alanrichey wrote:Any luck with this Custom Remote ?
Hi Al
Thanks for customizing the remote. Excuse my lack of knowledge - after I download and unzip the file on my desktop where and how do I load it ?
Please forgive my ignorance and thanks again for all your efforts.

Are you looking for additional guidance over what has already been written up in the one sticky thread at the top of this forum, or have you not read that thread?

alanrichey · Post by **alanrichey** » Wed Jun 02, 2010 12:50 am

More importantly, have you read the README file that was in the ZIP ? That has extensive instructions on what to do.

patdescon · Post by **patdescon** » Wed Jun 02, 2010 1:58 pm

alanrichey wrote:More importantly, have you read the README file that was in the ZIP ? That has extensive instructions on what to do.

Will do - thanks guys.
Al, I am away from my home for the next week and will be unable to test until my return - will report then.

alanrichey · Post by **alanrichey** » Wed Jun 02, 2010 2:09 pm

OK, although remember you don't need to be at home to do it. You can install Custom Remotes remotely, I do it all the time. All you need is a laptop.

patdescon · Post by **patdescon** » Fri Jun 04, 2010 6:20 pm

alanrichey wrote:OK, although remember you don't need to be at home to do it. You can install Custom Remotes remotely, I do it all the time. All you need is a laptop.

Al, I attached my slingbox solo to my DN receiver before leaving so I would be unable to test with the I-Link.

alanrichey · Post by **alanrichey** » Sat Jun 12, 2010 2:35 am

OK, 10 days gone now. Do I give up on you ?

patdescon · Post by **patdescon** » Sun Jun 13, 2010 8:07 pm

Hi Al, just getting back tonight after a 2 week business trip. Don't give up on me - will report shortly - thanks again !

alanrichey · Post by **alanrichey** » Sat Jun 19, 2010 2:32 am

You obviously have a completely different definition of 'shortly' to me. I measure it in hours not weeks

alanrichey · Post by **alanrichey** » Thu Jun 24, 2010 8:09 am

And another 5 days go by. I think I will give up on this one, it is cluttering up my work folder.

JP1 Remotes

I-Link 9000 Code for use on Slingbox Solo

I-Link 9000 Code for use on Slingbox Solo

I-link 9000

Re: I-link 9000

I-Link 9000

I-Link 9000

I-Link 9000