Xtreamer Media Player PL Bin or RMDU file

[ray1013]

1. Device: Xtreamer Media Player
2. Type of device: Media Player
3. Year: 2010
4. JP1/UEI Remote model: ?
5. Do you have a JP1 cable? no
6. Still have original remote? Yes
7. Checked the file section? Yes
8. Checked Pronto file section (at R/C)?
9. Partially working setup code? No
10. Learning remote question? would like to build PL file for Slingbox Media

[vickyg2003]

Ray had posted this in the non-jp1 area before so we didn't know what kind of output was needed.


A quick google found that the xtreamer power toggle in NEC1 Device 0, OBC 4.

xtreamer Power Toggle
0000 006D 0022 0002 0156 00AA 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 0015 0016 0015 0016 003F 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 003F 0016 003F 0016 0015 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 05F6 0156 0055 0016 0E49

[ray1013]

Thanks for the reply Vicky..I am new to the remote control world...output as to where I would like to send the signal? I would like to create a PL file using remote master...then moving that file into the Slingbox folder in order to contol the media player via internet.

[vickyg2003]

Hi Ray, we need to find the rest of the signals. We could make a PL file to test just the power button, but we need to find more information. My post just let the guys know we are looking for Nec1, Device 0.

I didn't see anything when I checked the file section here, or at remotecentral, but I don't always do the best searches.

[vickyg2003]

Hi again, on a long shot try this file
https://www.hifi-remote.com/forums/dload ... le_id=6598
It's for another media player that has the same power code.

[alanrichey]

Although the power is correct, I think you might find some of the buttons use different codes. If so try this one

https://www.hifi-remote.com/forums/dload ... le_id=8520

Please let me know how you get on

Al

[ray1013]

The file you linked me to worked! There are a few functions missing...but power worked, ff, rew, menu etc...I would really like to get the page up/dn working. I looked at the functions page but page up/dn is not an options. So I am unable to map them. I will take shots in the dark and use the Patriot Box file to see if anything matches up. Thanks for your help!

[alanrichey]

The way I built the file was was to install the device on my Harmony Universal remote and use that it 'mimic' your remote while I learned the codes. Whoever had put it on the Logitech database had defined the Page+/- buttons, but they were simply the same codes as the Skip +/- buttons, so I didn't bother adding them. I assume that on the remote the Page+/- buttons have a different effect to the Skip +/- ones ?

If you find the codes or need to help let me know. Meanwhile I will upload the files to the File Section.

[ray1013]

You are correct...the first thing I tried was the skip/repeat buttons and they have the same function as the page -/+ buttons. So I say post the files as they worked! Thanks again!

[alanrichey]

I actually already had But thanks for the confirmation.

Al