Need codes for DGstation Cuberevo (AKA ABcom IPBox 9000) JU

samkatta · Post by **samkatta** » Sun Apr 18, 2010 11:25 am

I have slingbox with JU Blaster version.
I need remote codes for DGstation Cuberevo (also known as ABcom IPBox 9000) for the slinplayer.
Thanx in advance.

Post by **The Robman** » Sun Apr 18, 2010 5:11 pm

You could try our code for the ABCom IPBox 910HD:
https://www.hifi-remote.com/forums/dload ... le_id=6837

or maybe our code for the DGStation Mutant/CubeCafe 200s:
https://www.hifi-remote.com/forums/dload ... le_id=4761

samkatta · Post by **samkatta** » Mon Apr 19, 2010 3:27 pm

Thank you Robman for your reply.
Unfortunately, no luck with any of the files.
More help would be appreciated.
By the way, it seems like my blasters are PL version (although they show version 2 on the slingbox properties) because slingplayer is not accepting the JU files.
Thank you again.

Post by **The Robman** » Mon Apr 19, 2010 3:46 pm

samkatta wrote:Thank you Robman for your reply.
Unfortunately, no luck with any of the files.
More help would be appreciated.
By the way, it seems like my blasters are PL version (although they show version 2 on the slingbox properties) because slingplayer is not accepting the JU files.
Thank you again.

Are you saying that the files didn't work because they are JU files, or are you saying that you re-formatted them as PL files and then confirmed that they don't work?

samkatta · Post by **samkatta** » Mon Apr 19, 2010 5:45 pm

No, I tried all files with different versions JU, PL and others.
In the process I discovered accidentally that my box only recognizes the PL files from SBAV folder and not the others.
Other than that, I got no luck in controlling the box with any of the code files.

samkatta · Post by **samkatta** » Tue Apr 20, 2010 6:00 am

@Robman
I have USB IR Widget and I've tried to build my own codes file, however I was partially successful, can you please give me a step by step guide?
Initially the problems that I'm facing are:
The protocol that appeared from the cuberevo remote came out as StreamZap but it gives me different device IDs from different key presses (some keys gives me 40 and others give me 41) and when I compiled the file and put the Device ID as 40 I found that key presses that had device as 40 worked but key presses with device 41 didn't work.
Another thing, the key presses produced three steps (repeats) with a single press (eg. pressing info key shows the info and then detailed info and then info disappears all with single press) so how can I make it do one step only?
I hope you can help me out through this.
Thanx again.