The remote chart lists the Dreambox v4 remote (ie, the URC-39930RJ0-03) as being a learning remote, but the user manual doesn't mention anything about learning. I'm trying to determine if this remote can learn right out of the box or does it need a hardware modification.
This thread implies that there are missing components that need to be soldered in before learning will work. Is this true of all URC-39930 remotes, or just some of them?
Dreambox 7025 remote (URC-39930) and learning
Moderator: Moderators
-
The Robman
- Site Owner
- Posts: 22056
- Joined: Fri Aug 01, 2003 9:37 am
- Location: Chicago, IL
- Contact:
Dreambox 7025 remote (URC-39930) and learning
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
-
dreamon7025
- Posts: 4
- Joined: Sun Mar 22, 2009 2:28 pm
-
The Robman
- Site Owner
- Posts: 22056
- Joined: Fri Aug 01, 2003 9:37 am
- Location: Chicago, IL
- Contact:
Sorry, but I don't understand this message.dreamon7025 wrote:My N3202LB Nordmende-TV dont work with the codes from manual, not with Codes from Support ( DreamMultimedia ).
URC39930RJ0-03 is works with this ! I have tested !
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
-
dreamon7025
- Posts: 4
- Joined: Sun Mar 22, 2009 2:28 pm
I have the missing components soldered and this works with my Nordmende TV !The Robman wrote:Sorry, but I don't understand this message.dreamon7025 wrote:My N3202LB Nordmende-TV dont work with the codes from manual, not with Codes from Support ( DreamMultimedia ).
URC39930RJ0-03 is works with this ! I have tested !
Hello, same remote here. I can't get my "Orion TV37" working with it.
I doubt it is possible to teach this remote. The hardware has only the IR sender, no sensor.
Does it know more codes than the manual says? I tried all for the Orion brand.
Not I also tried the (991) Code Search - Search for device code for your tv/etc.. After around 100 steps the devices really switches off. Then I store the setting by "SETUP button". But it does not turn on again, neither turns off as it did before storing. So I tried this procedure several times to be sure for not skipping the right setup. But I'm sure I store the setting which made it switch off. How can this happen?
I doubt it is possible to teach this remote. The hardware has only the IR sender, no sensor.
Does it know more codes than the manual says? I tried all for the Orion brand.
Not I also tried the (991) Code Search - Search for device code for your tv/etc.. After around 100 steps the devices really switches off. Then I store the setting by "SETUP button". But it does not turn on again, neither turns off as it did before storing. So I tried this procedure several times to be sure for not skipping the right setup. But I'm sure I store the setting which made it switch off. How can this happen?