JP1 Remotes

[writetome]

Hi all !

My Remote control V3 URC-39730 B02 for dreambox DM7000 stop working OK ( it works the only key 0 and switches the audio OFF/ON and vicevesa )

NB. In TV mode still works well !

I don't know if it's my remote that is OFF or is my Dream that has problem.

I read a lot a thread but, up to now, I'm still in pain.

I'd like to use the ir.exe version 8.02 to load back ( upload to remote ) the remote-bakup.txt file but I don't have it ( of course I didn't download from the remote when the remote was OK )

My cable to connect the remote to the my PC is ready and up and running …

May someone kindly supply the original remote- backup.txt to upload to my remote ?


In alternative, may I reload the right code for dreambox ?

I means through the SHIFT procedure used to load TV code ?

If yes, which is the code that I have to enter ?

Please other suggestions are very welcome

Thanks a lot to all of You in advance

Write

[binky123]

There is a Dreambox V3 IR file here that you can look at. It has a different setup code on the DREAM device button(SAT/1561) but you can delete that as well as the SAT/1561 device upgrade and the $0173 Protocol upgrade. Possible Dreambox setup device codes start at SAT/0030 and go to SAT/0034.

[writetome]

My remote finally is working again.

Thanks
to binky123
to /www.hifi-remote.com/forums
to the contribution found on the web

I found and upload the right "Dreambox V3" - OUKAOUK1. "Dreambox-DM7000-v3.ir IR file:

http://www.hifi-remote.com/forums/viewtopic.php?t=10125&highlight=

and the right RDF file: OUKAOUK1.RDF:


http://tech.groups.yahoo.com/group/jp1/files/RDF%20Files/OUKAOUK1%20%28Dreambox%20V3%29.rdf


[General]
Name=Dreambox Remote V3
EepromSize=$800
AdvCodeAddr=$016..$0FF
UpgradeAddr=$100..$7FD
DevCodeOffset=30
Processor=S3C80
RAMAddr=$8000
RDFSync=3
ImageMap=DreamboxV2.map

[Settings]
VPT Device=$012.7.8.1.0 DeviceButtons
VPT Status=$015.3.1.0.0 (Off;On)
Dream Locked=$013.0.1.0.1 (Off;On)
TV Locked=$013.1.1.0.1 (Off;On)
AUX1 Locked=$013.2.1.0.1 (Off;On)
AUX2 Locked=$013.3.1.0.1 (Off;On)

[Checksums]
^$000:$002..$7FD

[FixedData]
$014 = $14

[DeviceTypes]
SAT = 0
TV = 1
VCR/DVD = 2
Audio = 3

[DeviceTypeAliases]
SAT = Cable,SAT,Video Acc
TV = TV
VCR/DVD = VCR,DVD,Tape,Laserdisc,PVR
VCR/DVD = DAT,CD,Home Auto,Phono,Tuner,Misc Audio,Amp

[DeviceButtons]
Dream = $00A $00B
TV = $00C $00D
AUX1 = $00E $00F
AUX2 = $010 $011

[Buttons]
DREAM=$09,
TV=$01,
AUX=$0A,
POWER=$03,
1=$15,2=$16,3=$17,4=$19,5=$1A,
6=$1B,7=$1C,8=$1D,9=$1E,0=$1F,
"vol up":VOL+=$04,"vol down":VOL-=$05,MUTE=$08,
"tv/vcr":"BACK (AV)"=$11,
"channel up":BOUQUET+=$06,"channel down":BOUQUET-=$07,
menu:"DREAM MENU"=$14,
guide:AUDIO=$25,
"up arrow":UP=$21,
"down arrow":DOWN=$22,
"left arrow":LEFT=$23,
"right arrow":RIGHT=$24,
select:OK=$12,
display:INFO=$13,
play:"GREEN (Play)"=$0C,
pause:"YELLOW (Pause)"=$0F,
rewind:"RED (Rewind)"=$0B,
"fast fwd":"BLUE (Fast Fwd)"=$0D,
stop:"TV (Stop)"=$0E,
record:"RADIO (Record)"=$28,
exit:VIDEO=$26,
"+100":"FORWARD (-/--)"=$18,
"next track":"Shift-VOL+"=$84,
"prev track":"Shift-VOL-"=$85,
"shift-left":"Shift-BOUQUET+"=$86,
"shift-right":"Shift-BOUQUET-"=$87,
"pip freeze":"Shift-TV (Stop)"=$8E,
slow:TEXT=$27,
eject:HELP=$10,
"slow+":"LAME (Zoom)"=$20,
"slow-":"Shift-LAME (Zoom)"=$A0,
x2:"Shift-MUTE"=$88,
center:"Shift-FORWARD (-/--)"=$98,
rear:"Shift-BACK (AV)"=$91,
Phantom1:Ph1=$F0,
Phantom2:Ph2=$63,
Phantom3:Ph3=$64,
Phantom4:Ph4=$65,
Phantom5:Ph5=$66,
Phantom6:Ph6=$67,
Phantom7:Ph7=$68,
Phantom8:Ph8=$69,
setup:"SHIFT (Setup)"=$02,
"Shift-0"=$9F,"Shift-1"=$95,
"Shift-2"=$96,"Shift-3"=$97,
"Shift-4"=$99,"Shift-5"=$9A,
"Shift-6"=$9B,"Shift-7"=$9C,
"Shift-8"=$9D,"Shift-9"=$9E,
"Shift-INFO"=$93,
"Shift-DREAM MENU"=$94,
"Shift-AUDIO"=$A5,
"Shift-VIDEO"=$A6,
"Shift-UP Arrow"=$A1,
"Shift-DOWN Arrow"=$A2,
"Shift-LEFT Arrow"=$A3,
"Shift-RIGHT Arrow"=$A4,
"Shift-OK"=$92,
"Shift-RED (Rewind)"=$8B,
"Shift-GREEN (Play)"=$8C,
"Shift-YELLOW (Pause)"=$8F,
"Shift-BLUE (Fast Fwd)"=$8D,
"Shift-RADIO (Record)"=$A8,
"Shift-VIDEO"=$A6,
"Shift-TEXT"=$A7,
"Shift-HELP"=$90,
PhHlp=$29

[ButtonMaps]
0 = ($1F, $15, $16, $17, $19, $1A, $1B, $1C, $1D, $1E), ($04, $05, $08), ($06, $07),
$03, $18, $11, $20, $13, $14, $28, $21, $22, $23, $24, $12, $25, $0B, $0C, $0F,
$0D, $0E, $26, $27, $10, $9F, $95, $96, $97, $99, $9A, $9B, $9C, $9D, $9E, $84,
$85, $88, $86, $87, $98, $91, $A0, $93, $94, $A8, $A1, $A2, $A3, $A4, $92, $A5,
$8B, $8C, $8F, $8D, $8E, $A6, $A7, $90, $29
1 = ($1F, $15, $16, $17, $19, $1A, $1B, $1C, $1D, $1E), ($04, $05, $08), ($06, $07),
$03, $18, $11, $13, $14, $28, $21, $22, $23, $24, $12, $25, $0B, $0C, $0F, $0D,
$0E, $10, $26, $27, $84, $85, $86, $87, $20, $A0
2 = ($1F, $15, $16, $17, $19, $1A, $1B, $1C, $1D, $1E), ($04, $05, $08), ($06, $07),
$03, $18, $11, $13, $14, $28, $21, $22, $23, $24, $12, $25, $0C, $0F, $0B, $0D,
$0E, $10

[DigitMaps]
140 94 29 64 92 75 34 38 07 21 71 37 33 74 85 26
59 86 79 53 32 13 46 39 17 31 09

[Protocols]
0001, 000B, 000D, 0010, 0011, 0013, 0014, 0018, 001C, 001F,
002A, 002C, 0034, 003D, 0045, 004A, 004B, 0051, 0058, 005A,
005B, 005C, 005D, 005E:2, 0064, 0065, 0068, 0072, 0075, 0079,
007C, 007E:2, 0082, 0087, 008C, 0090, 0098, 00A1, 00A5, 00A6,
00A8, 00AA, 00AB, 00B0, 00B2, 00B6, 00B7, 00BD, 00C9, 00CA,
00D5, 00D9, 00DE, 00E2, 00E5, 00E8, 00EB, 00F3, 00F4, 00F8:2,
0111, 0129, 0161, 016C

Now the remote works perfectly.

What remains is why the data in my remote were corrupted ( when i try to reload the original IR file downloaded by my remote I got: check sum error )


Any idea ?

Thanks again

Write

[binky123]

The main zip file for RDFs is here which has the OUKAOUK1.RDF file. Your RDF seems to be missing the OEM device button.

IR.exe should fix any checksum errors before writing the .IR file to EEPROM. Perhaps you are having a writing error? Check for weak batteries. It takes more voltage to write than to read from EEPROM.

[writetome]

Thanks binky123

May be I explain bad my self.

Now the remote works OK

When I say:

"I try to reload the original IR file downloaded by my remote and I got: check sum error"

It means:

"I loaded from the remote to PC the IR file when the remote was wrong and than when I upload it back and I got: check sum error" ...




Anyway now the remote works very well, for me, still remains the question:

why my remote that has worked OK for years went in data corrupted conditions ?

Any idea ?

Thanks a lot again

Write