View previous topic :: View next topic |
Author |
Message |
asphaltdancer
Joined: 13 Sep 2009 Posts: 22
|
Posted: Mon Feb 08, 2010 3:26 pm Post subject: oneforall Light Control Starter Kit with Dreambox V5 Remote |
|
|
Hello,
I wan't use the oneforall Light Control Starter Kit with my DM8000 Remote
could someone help me with this?
If someone has the original EFC or Hex Commands of the oneforall remotes with the light Button it would help me |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
asphaltdancer
Joined: 13 Sep 2009 Posts: 22
|
Posted: Mon Feb 08, 2010 5:54 pm Post subject: |
|
|
I have tried the X10 Code Upgrade but it is not working.
is it possible oneforall uses a other protocol for light control? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Mon Feb 08, 2010 6:18 pm Post subject: |
|
|
Are you sure you installed it correctly? Did you copy the protocol? Did you assign the new setup code to a device button? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
asphaltdancer
Joined: 13 Sep 2009 Posts: 22
|
Posted: Mon Feb 08, 2010 6:43 pm Post subject: |
|
|
I'm sure i have installed it correctly,
I have copied the protocol upgrade and the device Upgrade and then i have assigned Buttons i need to some unused Buttons of the TV Device
(the DM8000 Remote has only 2 Device Buttons)
If you would you could take a look at my *.ir file, i have uploaded it to:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=7986 |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Mon Feb 08, 2010 7:09 pm Post subject: |
|
|
The TV/1167 setup code isn't assigned to any of the device buttons, so what were you doing to test it? I do see a bunch of keymoves that use a setup code called TV/0167 though, did you typo the setup code number? _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
asphaltdancer
Joined: 13 Sep 2009 Posts: 22
|
Posted: Mon Feb 08, 2010 7:25 pm Post subject: |
|
|
I have assigned the keymoves I need => "all lights on" => Shift+Power
"turn on" to 4 , "turn off" to 7 and so on...
the other keymoves are "0034" for my Logitech Z5500 and "2000" for my Rademacher Rollotron"
the TV/0586 is used by my Philips LCD TV but I use only Power on/off
because this I use the other Buttons in TV Mode for other Devices
what did you mean with "did you typo the setup code number?"
I don't understand. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Mon Feb 08, 2010 7:39 pm Post subject: |
|
|
He means that your Device Upgrade is setup code 1167, while your keymoves call on Setup Code 0167.
1167 is not 0167. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
asphaltdancer
Joined: 13 Sep 2009 Posts: 22
|
Posted: Mon Feb 08, 2010 7:44 pm Post subject: |
|
|
oh now i see whats wrong...
ok i will fix this and test again! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Mon Feb 08, 2010 7:47 pm Post subject: |
|
|
Let me help explain the proper procedure for testing an upgrade. Before you do all the fancy shifted keymoves and any other fancy stuff, you should just assign the upgrade to a device button and test it, only then if it doesn't work should you come here saying the upgrade doesn't work.
If that first test proves that the upgrade does work, then try your fancy shifted keymoves and if they don't work, come here asking for help with them. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
asphaltdancer
Joined: 13 Sep 2009 Posts: 22
|
Posted: Tue Feb 09, 2010 3:06 am Post subject: |
|
|
ok, I understand.
now I have tested it without keymoves, and assigned the Upgrade directly to the TV Button.
but still the same Problem it is not working.
I have uploaded my new *.ir File
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=7986
the Problem is i could not program my IR Receiver
=> Press the Light Device key on your remote control so that is in Light Mode => now the TV key
=> Press the number you wish to assign to the HC Receiver. If this is your first Plug, number 1 is recommended, number 2 for the second etc. The IR Indicator at the top of the remote sould blink twice => it does not blink twice (ok other remote so this should not be a problem)
=> Press and hold the button on the HC Receiver until the red light begins to blink (no problem this is working)
=> Point your remote control towards the Command Centre an press the Channel UP (+) key. The red light should stop flashing (nothing happens I have tried all keys but the red light does not stop flashing) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
binky123 Expert
Joined: 14 Feb 2004 Posts: 1292
|
Posted: Wed Feb 10, 2010 12:10 pm Post subject: |
|
|
Your steps seem to match the standard One For All method of learning signals. If it continues to blink, that usually means it didn't detect any signal. Perhaps you can use a camera and look thru the viewfinder and check if you see any IR signals coming from the remote.
It also looks like you may be able to learn any signal to control the lights and don't need to use the X10 protocol used on the Light button. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
vickyg2003 Site Admin
Joined: 20 Mar 2004 Posts: 7073 Location: Florida |
Posted: Wed Feb 10, 2010 1:03 pm Post subject: |
|
|
One-for-all uses other codes for home automation other than the X10.
I noticed the lightkit link that Rob posted pointed to the UK site, and I know that the URC-7781 (a european model), has a whole bunch of setup codes for One-For-All home automation. I haven't loaded any of these into my remote to see what type of signals they shoot, but it could be that X10 isn't the right code
Common One-for-all Home Automation codes
Home Audo
0157 RC-5 20 120 31
0159 Sony 12/15 12 13
0167 X10
URC-7781 only
Home Audio
2200, 2201, 2202, 2203, 2204, 2205, 2206, 2207, 2208, 2209, 2210, 2211, 2212, 2213, 2214, 2215 _________________ Remember to provide feedback to let us know how the problem was solved and share your upgrades.
Tip: When creating an upgrade, always include ALL functions from the oem remote, even if you never plan on assigning them to a button. Complete function lists makes an upgrade more helpful to others.
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
asphaltdancer
Joined: 13 Sep 2009 Posts: 22
|
Posted: Wed Feb 10, 2010 1:57 pm Post subject: |
|
|
@binky123
the IR Receiver of the Starter Kit has a LED for IR Signals, this LED is blinking with every button of my Remote so i know my Remote is sending something
(the speed of the blink signal is changing with the X10 Protocol)
As I understand the Kit is not able to learn signals.
@vickyg2003
I think X10 is not the code oneforall uses.
I will look to find RM upgrades for the other codes so i could try it. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Wed Feb 10, 2010 2:29 pm Post subject: |
|
|
vickyg2003 wrote: | One-for-all uses other codes for home automation other than the X10.
I noticed the lightkit link that Rob posted pointed to the UK site, and I know that the URC-7781 (a european model), has a whole bunch of setup codes for One-For-All home automation. I haven't loaded any of these into my remote to see what type of signals they shoot, but it could be that X10 isn't the right code |
I based my assumptions on the fact that there's a URC-8305 Kameleon in the pic and when I opened the manual for that remote it explicitly says that it controls the OFA light kit and the only setup code available in that particular remote is 0167. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|