View previous topic :: View next topic |
Author |
Message |
YNunez78
Joined: 19 Jan 2010 Posts: 18
|
Posted: Wed Jan 20, 2010 9:53 pm Post subject: |
|
|
correction
Question, now that I have the jp1 interface completed, does IR7 work for Jp1.2/3 ? |
|
Back to top |
|
|
Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Wed Jan 20, 2010 10:07 pm Post subject: |
|
|
Yes, but why are you using IR 7 when it has been superceded by IR 8.02 some time ago? (Also, I assume that it is just your imprecise terminology, but a "JP1" interface will not work with a "JP1.2/3" remote no matter WHAT version of IR you are using. You are building a JP1.2/3 interface, correct?) _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|
Back to top |
|
|
YNunez78
Joined: 19 Jan 2010 Posts: 18
|
Posted: Wed Jan 20, 2010 10:33 pm Post subject: |
|
|
Yes I am except that its not connecting. I upgraded to IR8 and still nothing. I tried with and without batteries. Any Ideas. My build is very rough but I did check and recheck the connections |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4500
|
Posted: Wed Jan 20, 2010 10:46 pm Post subject: |
|
|
Troubleshooting Guide
Try fresh batteries, make sure you have pin 1 to pin 1, no other app is using your serial port, and JP1.x is picked in IR. |
|
Back to top |
|
|
YNunez78
Joined: 19 Jan 2010 Posts: 18
|
Posted: Wed Jan 20, 2010 10:47 pm Post subject: |
|
|
ok thanks |
|
Back to top |
|
|
YNunez78
Joined: 19 Jan 2010 Posts: 18
|
Posted: Wed Jan 20, 2010 11:12 pm Post subject: |
|
|
ok, i tried some things. First, I flipped the transistors around, and noticed the remote did not respond to buttons being pressed, yet it did when i unplugged the interface cable. So, I flipped the transistors back, and now it does blink when I press the buttons, but Jp1xtest says no jp1.x compatible remote found. |
|
Back to top |
|
|
YNunez78
Joined: 19 Jan 2010 Posts: 18
|
Posted: Thu Jan 21, 2010 2:31 am Post subject: |
|
|
Ok, I got it to work. I took the interface apart and then rebuilt it. Thanks to you guys i am up and rolling. I have one last question (hopefully). I found the hex codes to my projector on remote central
http://www.remotecentral.com/cgi-bin/codes/infocus/lp-290/
I used IRtool to decode it, but I dont have a clue what to do with it, or how to copy these commands to my comcast remote so it will control the projector. Any help would be much appreciated.. |
|
Back to top |
|
|
3FG Expert
Joined: 19 May 2009 Posts: 3365
|
Posted: Thu Jan 21, 2010 2:53 am Post subject: |
|
|
You can quite a few clues by opening up the Sticky thread entitled Beginners--PLEASE Read This First. Read JP1-Just How Easy Is It?
Then you can use RM to make an upgrade and copy it into IR. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21210 Location: Chicago, IL |
Posted: Thu Jan 21, 2010 8:47 am Post subject: |
|
|
YNunez78 wrote: | Ok, I got it to work. I took the interface apart and then rebuilt it. Thanks to you guys i am up and rolling. I have one last question (hopefully). I found the hex codes to my projector on remote central
http://www.remotecentral.com/cgi-bin/codes/infocus/lp-290/
I used IRtool to decode it, but I dont have a clue what to do with it, or how to copy these commands to my comcast remote so it will control the projector. Any help would be much appreciated.. |
Read the beginners guide, then start a new thread for your projector in the Code Search forum (using the required template), otherwise your projector questions will get lost in this DB25 thread. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
|