IODATA HVT-BT200

k-park · Post by **k-park** » Sun Jul 19, 2009 11:32 pm

http://www.hifi-remote.com/forums/dload ... le_id=6952

I captured remote signals from IODATA HVT-BT200
but it is shown as

Gap-550-1687-40?
Gap-584-1710-40?

IR.exe cannot find proper Protocol

Using IR.EXE 7.15 and URC-8910.

This settop box has double tuner which support terrestial and sattelite
and has button for each tuner
so, I assigned that buttons to the volume buttons.
(originally volume buttons was for TV)

please make upgrade file for this

thanks in advanced

Post by **The Robman** » Mon Jul 20, 2009 8:38 pm

Here's a KM file for you to try:
http://www.hifi-remote.com/forums/dload ... le_id=6955

I've moved the detailed description of how we decoded it here:
http://www.hifi-remote.com/forums/viewtopic.php?t=11767

k-park · Post by **k-park** » Wed Jul 22, 2009 10:15 am

thank you Robman

upgrade file operated normally.
I would add more buttons and upload it.

CarlosSB88 · Post by **CarlosSB88** » Mon Oct 12, 2009 3:19 am

Hi.

I've bought a HVT-B200 for a slingbox. But this device isn't supported.
I need .bin file for remote control. Can anyone help me?

alanrichey · Post by **alanrichey** » Mon Oct 12, 2009 11:55 am

Closest I could get was the IO Data HVT-ST200. Give it a try and let me know if it works, as I had to guess a couple of keys (zero and red).

http://www.hifi-remote.com/forums/dload ... le_id=7363

alanrichey · Post by **alanrichey** » Wed Oct 14, 2009 10:09 am

Any luck with this remote ? I don't like uploading unproven remotes.

taneujin · Post by **taneujin** » Sat Jan 09, 2010 6:23 am

I have tried the HVT-ST200 and it does not work.

I am hoping someone can help me out with the HVT-BT200.

I tried searching through the internet but everything is in Japanese.

Appreciate if anyone can help me out to get the .bin file for HVT-BT200.

alanrichey · Post by **alanrichey** » Sat Jan 09, 2010 9:08 am

No, the Logitech database that I use to install the device onto my Harmony Universal Remote only has the HVT-ST200.

And I guess you didn't check the Readme file were I SPECIFICALLY say that '..does not work.." is not an acceptable reply ?

Al

taneujin · Post by **taneujin** » Sat Jan 09, 2010 9:19 am

Hi Alan,
I didn't check the Readme file as I was not able to download from the above link.

So I guess it'll not work for now.

alanrichey · Post by **alanrichey** » Sat Jan 09, 2010 9:33 am

Err... If you couldn't download it how do you know it didn't work ? I'm confused.

Do you want me to put it back up ?

taneujin · Post by **taneujin** » Sat Jan 09, 2010 9:36 am

Inside slingplayer, it'll download from it's database and it will show up in slingplayer (the .bin file is stored in the sbav folder)

Its ok, no need to put it up. I've already tested it.

Thanks!

alanrichey · Post by **alanrichey** » Sat Jan 09, 2010 10:05 am

Still don't understand how you could get hold of the BIN files and not have the Readme file. They were in the same ZIP file. But happy to drop it now.

taneujin · Post by **taneujin** » Sat Jan 09, 2010 12:38 pm

As I mentioned, I didn't download from your link.

It was automatically downloaded from Slingbox's database using the Slingplayer software.

Post by **The Robman** » Wed Jan 20, 2010 7:03 pm

taneujin wrote:As I mentioned, I didn't download from your link.

It was automatically downloaded from Slingbox's database using the Slingplayer software.

If the Slingplayer software "automatically downloaded" it, you weren't using the file that Alan created. In order to use his file, you would need to download it, save it in your SBAV folder and then load it.

Full instructions are here:
http://www.slingcommunity.com/article/3 ... ingPlayer/