JP1 Remotes

enliteneer · Joined: 26 Dec 2007 Posts: 13

I have a jukebox whose power button is very inaccessible...

But I have a ac plug that can turn on/off any appliance connected to it via a (RF) remote. However, since it's rf, I cant use my single universal remote!
( http://www.buy.com/retail/product.asp?sku=206563685&listingid=20335328 )

I'd really like to get rid of this special remote... is there a IR to RF adapter that I could program to control this RF ac plug?

I'm assuming I'd have to first capture the rf command that the plug needs, and program an rf transmitter to send it when it gets a ir command... this capturing might be tricky too, no?

mdavej · Expert Joined: 08 Oct 2003 Posts: 4501

There is no IR/RF adapter to do that. However, if you return it and get an X10 appliance module and an IR543 module (less than $20 for both on ebay) you can easily control it with most universal remotes.

Tommy Tyler · Posted: Mon Jan 04, 2010 9:28 am Post subject:

Here's an inexpensive plug-in power switch that will learn a remote signal and give you ON/OFF control of the jukebox. It's not perfect. It has a reasonable range, but responds only to remote signals with carrier frequency below 52KHz (that leaves out RCA signals) and might respond to more than one button of the remote. But for $5.68 shipped it's worth trying.

http://www.dealextreme.com/details.dx/sku.13147