Humax PVR9300T

acw · Post by **acw** » Thu Nov 19, 2009 4:54 pm

Hi

I have created an RM file based on the excellent work of Alan Richey.

I have built the binary using RM 1.97 with the new map files for Slingbox.

I am using Slingplayer 2.0.4.521

I have mapped all of the functions on the Humax remote.

List is on the Last key
Back is on the Enter Key
Text is in the white key
Volume is on page +/-

The problem I have is that the exit key is greyed out in the on screen remote. Can anyone advise what is wrong please.

Both files are in the diagnostics section:

http://ww.hifi-remote.com/forums/dload. ... le_id=7502
http://ww.hifi-remote.com/forums/dload. ... le_id=7503

Thanks

Andrew

alanrichey · Post by **alanrichey** » Fri Nov 20, 2009 1:55 am

Hi Andrew

I suspect you are using the 'official' Slingbox RDF files ? and they do contain a bug that blocks some buttons.

Try using the revised ones I built at https://www.hifi-remote.com/forums/dload ... le_id=7201

Let me know if that doesn't help.

Cheers

Al

alanrichey · Post by **alanrichey** » Fri Nov 20, 2009 10:39 am

Further to this, I just remembered that the first set of RDF files I uploaded had a typo in that caused the Exit button to be disabled in the RV file. So you need to get the latest copy.

You can tell if it is correct by looking at the last entry in the Buttons tab for the RV file. It will be 'exit', but the broken version has an asterix against it showing it is not defined.

Sorry about that.

acw · Post by **acw** » Fri Nov 20, 2009 12:16 pm

Hi Al

Thanks for the swift response.

I did wonder if the * was significant.

I only downloaded the files last night, but have just done so again (from the above link) to make sure I had the right versions, but the * is still there for the RV version.

As a slight aside, botin both the PL and RV versions the keys either side of the record button aren't available for proramming.

Cheers

Andrew

alanrichey · Post by **alanrichey** » Fri Nov 20, 2009 12:33 pm

OK, I think the 'old' RDF file is somehow attached to your RMDU file. Try opening up Remotemaster and checking the Exit* before you load your RMDU. If it isn't there that is the answer. If the * is there on a empty file then PM me your e-mail address and I will send a fixed RDF file.

In the empty on is OK then open up the old RMDU file in a new RM session in a separate window and build a new copy on the correct version. You can 'cut & paste' all the columns in the Function screen, if you use Auto-Assign in the Buttons tab it only takes a few seconds to do it.

And I have a bug report in with Slingmedia concerning this buttons as that is their fault not the RDF or Remotemaster.

Al

acw · Post by **acw** » Fri Nov 20, 2009 12:52 pm

Making progress!

It's the 'Device Type' that is causing the problem. If it is set to DAT, PVR TAPE or VCR then the * appears.

Andrew

alanrichey · Post by **alanrichey** » Fri Nov 20, 2009 1:05 pm

OK I see that as well. Interestingly no-one else has noticed that, well done

Quick workaround is to use SAT as the device type. Doesn't actually matter as Slingplayer uses the same generic remote for Cable, SAT & VCR.

If you find the error before me let me know.

alanrichey · Post by **alanrichey** » Fri Nov 20, 2009 1:29 pm

OK, found the error. If you look in the RV RDF file you will see the code for 'Exit' is 37 (&25). In the [Button Maps] section the maps for DVD, SAT & Cable all have &25 in, but the VCR one doesn't. Turns out is has $24 instead which is the code for 'Cancel'

So in the [Button Map] section for code '02' replace the &24 with &25 and everything works OK.

Alternatively I've updated the package on the Slingbox Work Files section you could get it from there.

Thanks for finding the bug.

Cheers

Al

acw · Post by **acw** » Fri Nov 20, 2009 4:42 pm

Thanks for fixing that Al - I think I have finished.

Had the Humax for a few days now and have just decided to look at the instruction manual, then found all of the extra buttons under the sliding panel on the Humax remote!

I have mapped all of these to custom buttons where there wasn't a pre-defined button on the generic sling remote.

One more bit of wierdness is that I programmed the skip+ and skip- buttons but it is the Instant Replay and Quick Skip buttons have been programmed. This is actually the buttons I wanted to program, but as noted above RemoteMaster didn't allow these to be programmed.

I have packed up my files and posted them in the Slingbox section.

Thanks again for your help.

Andrew

alanrichey · Post by **alanrichey** » Sat Nov 21, 2009 2:43 am

Well done, and thanks for the upload

I think the Instant Replay/Quick Step name is just one that SlingMedia picked and doesn't relate to RemoteMaster at all. Again, I have pointed this out to them

Al