JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in

Looking for Dreambox 800PVR Discrete code

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> Discrete Codes
View previous topic :: View next topic  
Author Message
jspassov



Joined: 20 Nov 2005
Posts: 4

                    
PostPosted: Wed Aug 13, 2008 8:10 am    Post subject: Looking for Dreambox 800PVR Discrete code Reply with quote

Does anyone have a discrete power codes for Dreambox DM800 PVR (HD)?
Back to top
View user's profile Send private message
prwoolfall



Joined: 05 Dec 2005
Posts: 14

                    
PostPosted: Sun Apr 05, 2009 2:13 am    Post subject: Re: Looking for Dreambox 800PVR Discrete code Reply with quote

jspassov wrote:
Does anyone have a discrete power codes for Dreambox DM800 PVR (HD)?


Are you still looking for these? If so I'll try to remember to send you tomorrow if you want?
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Sun Apr 05, 2009 9:25 am    Post subject: Reply with quote

Even if jspassov doesn't respond, could you please post the discrete codes anyway, that way they'll be documented for anyone else that might be looking for them.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
prwoolfall



Joined: 05 Dec 2005
Posts: 14

                    
PostPosted: Sun Apr 05, 2009 10:30 pm    Post subject: Reply with quote

The Robman wrote:
Even if jspassov doesn't respond, could you please post the discrete codes anyway, that way they'll be documented for anyone else that might be looking for them.


Unfortunately they are for the type Box DM 500 & 7000. I assumed (incorrectly) that they would work on the DM 800; they do not. For the record they are

On e8
Off b4
Back to top
View user's profile Send private message
prwoolfall



Joined: 05 Dec 2005
Posts: 14

                    
PostPosted: Sun Apr 05, 2009 10:46 pm    Post subject: Reply with quote

prwoolfall wrote:
The Robman wrote:
Even if jspassov doesn't respond, could you please post the discrete codes anyway, that way they'll be documented for anyone else that might be looking for them.


Unfortunately they are for the type Box DM 500 & 7000. I assumed (incorrectly) that they would work on the DM 800; they do not. For the record they are

On e8
Off b4


From the Gemini Project (if it helps)

Gemini2 v4.1
DM7025 = Enigma from 06.02.2009
DM800 and DM8000 = Enigma from 07.02.2009

New:
* File-Manager extended (Information, display and favourites). It's now eaysier to achieve, simply press BLUE-RED
* In the channel list, the distance between the stations and the actual EPG event can be changed by yourself (BP-> Settings-> General)
* At Dreamnetcast and the jukebox you can chose the background
* Menu's extra/settings seperated. BP has partly new construction (Addons are now at BP-> Settings to find)
* Discrete OFF(Standby) by shift-0, ON by shift-1, OFF (Deep Standby) by shift-2 (DM8000 not with original Remotecontrol)
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21210
Location: Chicago, IL

                    
PostPosted: Sun Apr 05, 2009 11:18 pm    Post subject: Reply with quote

prwoolfall wrote:
For the record they are

On e8
Off b4

As these are not JP1 codes, could you also post some known codes (like POWER, CH+, etc) so we can compare them and figure out how to convert them to JP1 codes.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
prwoolfall



Joined: 05 Dec 2005
Posts: 14

                    
PostPosted: Mon Apr 06, 2009 12:20 am    Post subject: Reply with quote

prwoolfall wrote:
prwoolfall wrote:
The Robman wrote:
Even if jspassov doesn't respond, could you please post the discrete codes anyway, that way they'll be documented for anyone else that might be looking for them.


Unfortunately they are for the type Box DM 500 & 7000. I assumed (incorrectly) that they would work on the DM 800; they do not. For the record they are

On e8
Off b4


From the Gemini Project (if it helps)

Gemini2 v4.1
DM7025 = Enigma from 06.02.2009
DM800 and DM8000 = Enigma from 07.02.2009

New:
* File-Manager extended (Information, display and favourites). It's now eaysier to achieve, simply press BLUE-RED
* In the channel list, the distance between the stations and the actual EPG event can be changed by yourself (BP-> Settings-> General)
* At Dreamnetcast and the jukebox you can chose the background
* Menu's extra/settings seperated. BP has partly new construction (Addons are now at BP-> Settings to find)
* Discrete OFF(Standby) by shift-0, ON by shift-1, OFF (Deep Standby) by shift-2 (DM8000 not with original Remotecontrol)


From the PLI website (it was in Dutch so excuse if incorrect)

'Go to' in your Dream Image (using an FTP program).

/usr/share/tuxbox/enigma/resources/rclargesilver.xml

hex code 50 en 51

<key name="discrete_off" code="50"/>
<key name="discrete_on" code="51"/>

Haven't tried it yet myself.

Will tonight.
Back to top
View user's profile Send private message
prwoolfall



Joined: 05 Dec 2005
Posts: 14

                    
PostPosted: Mon Apr 06, 2009 4:41 am    Post subject: Reply with quote

The Robman wrote:
prwoolfall wrote:
For the record they are

On e8
Off b4

As these are not JP1 codes, could you also post some known codes (like POWER, CH+, etc) so we can compare them and figure out how to convert them to JP1 codes.


They are power on and power off. They are in HEX and if you use in JP1 (Remote Master) they will work in whatever key you map them too. I have used them in the original remote and a 10820 I purchased from you.

You need to enter them (in hex) as E8 00 and B4 00 on your template in RM (use any from those listed on the forum) and as stated above, map them where ever you wish.
Back to top
View user's profile Send private message
prwoolfall



Joined: 05 Dec 2005
Posts: 14

                    
PostPosted: Mon Apr 06, 2009 4:51 am    Post subject: Reply with quote

prwoolfall wrote:
The Robman wrote:
prwoolfall wrote:
For the record they are

On e8
Off b4

As these are not JP1 codes, could you also post some known codes (like POWER, CH+, etc) so we can compare them and figure out how to convert them to JP1 codes.


They are power on and power off. They are in HEX and if you use in JP1 (Remote Master) they will work in whatever key you map them too. I have used them in the original remote and a 10820 I purchased from you.

You need to enter them (in hex) as E8 00 and B4 00 on your template in RM (use any from those listed on the forum) and as stated above, map them where ever you wish.


For convenience I have posted an rmdu file on Device Upgrades (Sat Section) entitled "DB V4 ORIGINAL WITH DISCRETE"
Back to top
View user's profile Send private message
prwoolfall



Joined: 05 Dec 2005
Posts: 14

                    
PostPosted: Mon Apr 06, 2009 10:57 am    Post subject: Reply with quote

prwoolfall wrote:
prwoolfall wrote:
The Robman wrote:
prwoolfall wrote:
For the record they are

On e8
Off b4

As these are not JP1 codes, could you also post some known codes (like POWER, CH+, etc) so we can compare them and figure out how to convert them to JP1 codes.


They are power on and power off. They are in HEX and if you use in JP1 (Remote Master) they will work in whatever key you map them too. I have used them in the original remote and a 10820 I purchased from you.

You need to enter them (in hex) as E8 00 and B4 00 on your template in RM (use any from those listed on the forum) and as stated above, map them where ever you wish.


For convenience I have posted an rmdu file on Device Upgrades (Sat Section) entitled "DB V4 ORIGINAL WITH DISCRETE"


OK The code for the DB800 as HEX (again enter into the KM) is

Power On 61 00
Power Off 60 00

Checked and working on the DB remote and should be OK for all others. Remember the codes are in HEX and if you enter in the KM for the file mentioned above they work fine and I have tested them,

If you total shut down i.e. deep standby then use 62 00 (as Hex).

That's it
Back to top
View user's profile Send private message
cutter



Joined: 13 Nov 2009
Posts: 2

                    
PostPosted: Fri Nov 13, 2009 2:21 pm    Post subject: Reply with quote

I'm trying to use the power on and off discrete codes for dreambox 800 on my Pronto. I can't understand how to input the codes as provided in the previous answer (Power On 61 00, Power Off 60 00) to the Pronto.

From browsing to another site, I saw that "Power On" decodes to:

0000 006D 0012 0012 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 004B 0008 001D 0008 001D 0008 003C 0008 0022 0008 001D 0008 001D 0008 0BF2 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 0022 0008 0046 0008 001D 0008 003C 0008 0022 0008 001D 0008 001D 0008 0BF2

and "Power Off" decodes to:

0000 006D 0012 0012 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 0051 0008 001D 0008 001D 0008 003C 0008 001D 0008 001D 0008 001D 0008 0BF2 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 0027 0008 0046 0008 001D 0008 003C 0008 001D 0008 001D 0008 001D 0008 0BF2

However, none of these codes work when i test them on the Pronto. Can someone please help? Thank you for your time.
Back to top
View user's profile Send private message
prwoolfall



Joined: 05 Dec 2005
Posts: 14

                    
PostPosted: Fri Nov 13, 2009 11:12 pm    Post subject: Reply with quote

cutter wrote:
I'm trying to use the power on and off discrete codes for dreambox 800 on my Pronto. I can't understand how to input the codes as provided in the previous answer (Power On 61 00, Power Off 60 00) to the Pronto.

From browsing to another site, I saw that "Power On" decodes to:

0000 006D 0012 0012 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 004B 0008 001D 0008 001D 0008 003C 0008 0022 0008 001D 0008 001D 0008 0BF2 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 0022 0008 0046 0008 001D 0008 003C 0008 0022 0008 001D 0008 001D 0008 0BF2

and "Power Off" decodes to:

0000 006D 0012 0012 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 0051 0008 001D 0008 001D 0008 003C 0008 001D 0008 001D 0008 001D 0008 0BF2 0008 001D 0008 0065 0008 001D 0008 006A 0008 0032 0008 0032 0008 0022 0008 0051 0008 020D 0008 001D 0008 0027 0008 0046 0008 001D 0008 003C 0008 001D 0008 001D 0008 001D 0008 0BF2

However, none of these codes work when i test them on the Pronto. Can someone please help? Thank you for your time.


The codes I provided are valid for use in the Gemini Image Only.
Back to top
View user's profile Send private message
cutter



Joined: 13 Nov 2009
Posts: 2

                    
PostPosted: Sat Nov 14, 2009 4:37 am    Post subject: Reply with quote

That explains it... However, I never thought that the image used was a factor since i believed that the IR codes are hardwired in the DM hardware... I'm using Nabilosat Black hole 0.11; any chance of discovering the correct codes for this image?
Back to top
View user's profile Send private message
prwoolfall



Joined: 05 Dec 2005
Posts: 14

                    
PostPosted: Sat Nov 14, 2009 10:31 pm    Post subject: Reply with quote

No idea; ask on a Nabilosat forum.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> Discrete Codes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control