RemoteMaster will not import BIN files

alanrichey · Post by **alanrichey** » Sat Aug 29, 2009 7:00 pm

I am trying to import the BIN files from https://www.hifi-remote.com/forums/dload ... le_id=3771 but nothing appears in RemoteMaster.

Am I doing something wrong ?

Post by **vickyg2003** » Sat Aug 29, 2009 7:27 pm

Alan, is this for the Echostar Pal box for over the air digital reception? If so perhaps you can start from the Echostar Pal KM upgrade.

alanrichey · Post by **alanrichey** » Sat Aug 29, 2009 7:59 pm

I'm not sure. This was the thread, where I suggested the user check out all the various Sky Italy upgrade files and he told me that this was the file that worked but it only had a few buttons defined. I was hoping to recreate the RM file so I could add some buttons.

http://www.slingcommunity.com/forum/thr ... -Decoder./

Al

Post by **vickyg2003** » Sat Aug 29, 2009 9:02 pm

Okay, not the Echostar Pal. UEI has three official upgrades for Sky Italia, but from what I've seen of the Pal boxes, its probably the one that uses the dreambox/moxi protocol.

I couldn't open those bin files either, I'd suggest you try this one

https://www.hifi-remote.com/forums/dload ... le_id=3769

Although this one the fixed data is 14,0F,44,31, but the official CBL/1693 has 10 0f 44 31 for the fixed data.

Post by **The Robman** » Sun Aug 30, 2009 6:24 am

Here's the original upgrade that I used to create that bin file...
https://www.hifi-remote.com/forums/dload ... le_id=3769

And here's the thread where it was discussed...
https://www.hifi-remote.com/forums/viewtopic.php?t=7187