Receiver SKY S12M-T code

ramiro-notaria · Post by **ramiro-notaria** » Thu Jun 25, 2009 11:38 am

I have a Slingbox SOLO receiver and connect a sky S12M-T model (that is philips) but is not on the list, I add the code ... you could help me with the file of codes please ...

alanrichey · Post by **alanrichey** » Mon Jun 29, 2009 2:37 am

I've built a test remote at

https://www.hifi-remote.com/forums/dload ... le_id=6899

Please let me know if it works.

Al

ramiro-notaria · Post by **ramiro-notaria** » Mon Jun 29, 2009 3:33 pm

thank you, and install the file and detects that the button sends the channel in reverse order, instead of moving back, how can I solve this?.

The file is used _PL.bin ..

Thanks and I hope your comments

alanrichey · Post by **alanrichey** » Mon Jun 29, 2009 4:02 pm

I've uploaded a new version that reverses the Channel Up/Down

Better ?

ramiro-notaria · Post by **ramiro-notaria** » Tue Jun 30, 2009 8:33 am

thanks, I can not display the universal control of sky ...

alanrichey · Post by **alanrichey** » Tue Jun 30, 2009 7:33 pm

Once you select a Custom Remote you have to use the generic remote. Slingmedia will not allow changing of the skin.

Sorry

hromog · Post by **hromog** » Mon Aug 31, 2009 12:08 am

Hi the download link to the file says the file no longer exists, i need the codebfor this tuner S12M-T.

Thanks

alanrichey · Post by **alanrichey** » Mon Aug 31, 2009 4:30 am

That was just a set of test files held in a temporary file section, so they were removed fairly quickly. Normally I upload these to the Slingbox BIN files area in the File Section, but for some reason it isn't there. I'll rectify that but for the moment you can get it at http://www.slingcommunity.com/download/ ... Satellite/

JP1 Remotes