View previous topic :: View next topic |
Author |
Message |
Digital Larry
Joined: 28 Dec 2007 Posts: 56
|
Posted: Wed May 20, 2009 6:42 pm Post subject: Trouble creating BIN file using MCE protocol. |
|
|
Target device = Moxi HD DVR.
Target chip = UEI PL or Axum (used on HAVA, similar to SlingBox)
IR 7.14 decodes the protocol just fine.
MCE
Device 8
Subdevice 57
Misc T = 1
Over in Remote Master 1.86, choosing MCE protocol gives me the option to enter
Device
OEM2
Well I put 57 for OEM2 since I couldn't think of what else to do... but the resulting codes from my HAVA (a) don't work, (b) decode as "garbage" through the URC8910/IR combination.
Hints? |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Wed May 20, 2009 8:37 pm Post subject: |
|
|
Post your IR file, with the learned signals in it, so we can take a look. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
mdavej Expert
Joined: 08 Oct 2003 Posts: 4501
|
Posted: Wed May 20, 2009 9:38 pm Post subject: |
|
|
No need to reinvent the wheel. There are several Moxi upgrades and slingbox files in the file section. |
|
Back to top |
|
|
Digital Larry
Joined: 28 Dec 2007 Posts: 56
|
|
Back to top |
|
|
Digital Larry
Joined: 28 Dec 2007 Posts: 56
|
Posted: Tue May 26, 2009 2:18 pm Post subject: |
|
|
I did this exercise again using the most recent software:
IR.exe 8.00
and
RemoteMaster 1.93...
But the end result is the same. |
|
Back to top |
|
|
Digital Larry
Joined: 28 Dec 2007 Posts: 56
|
Posted: Wed May 27, 2009 12:02 pm Post subject: |
|
|
***DOOFUS ALERT***
***DOOFUS ALERT***
Hi Kids,
Just reporting back on my sad but exaggerated tale of woe. Turns out that my BIN file works just fine. I was lacking the actual device to test so I was trying to capture the codes from the HAVA IR blaster cable to compare to the original. I guess what's happening is that the HAVA blaster output is quite a bit lower than with a handheld remote (which makes sense as it's supposed to work from 1-2 inches away rather than 15 feet).
So now I can confirm that as far as I can tell, MCE protocol attribute "OEM2" in RM corresponds to "Subdevice" as reported by IR.exe.
Over and out! |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
Posted: Wed May 27, 2009 2:34 pm Post subject: |
|
|
I've tried capturing from the Slingbox IR blaster and have never been able to do so, so I understand. _________________ Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
Back to top |
|
|
houdini
Joined: 18 Jan 2007 Posts: 37
|
Posted: Fri Jun 19, 2009 11:19 am Post subject: |
|
|
Hey Larry, can you post your RM file for the moxi hd 3012 dvr that you got? I just got mine installed today and I'm trying to set up my slingbox. I guess I need to create a bin.
I did a search and didn't find the file. If I've missed it please link me!
Thanks |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
|
Back to top |
|
|
houdini
Joined: 18 Jan 2007 Posts: 37
|
Posted: Fri Jun 19, 2009 3:01 pm Post subject: |
|
|
Thanks Rob but those are the old MOXI dvr bins right?
I have the new Moxi hd 3012 dvr. I see that Larry posted IR files and possibly the pronto file. I was hoping to get the RM file he made so I could generate a PL slingbox bin. |
|
Back to top |
|
|
The Robman Site Owner
Joined: 01 Aug 2003 Posts: 21237 Location: Chicago, IL |
|
Back to top |
|
|
houdini
Joined: 18 Jan 2007 Posts: 37
|
Posted: Sat Jun 20, 2009 10:30 pm Post subject: |
|
|
Thanks Rob. Works like a charm |
|
Back to top |
|
|
|