IR Codes for Cisco RNG200

msprandel · Post by **msprandel** » Tue Feb 03, 2009 5:22 am

Hello all,

I have been trying for quite some time now to get my Slingbox Pro HD to work with a Comcast supplied Cisco RNG200 / SA Explorer 8500 DVR. While I have been able to get the basic functions to work, i cannot control any of the DVR or other extended functions. Any help would be greatly appreciated. Thanks in advance.

Post by **The Robman** » Tue Feb 03, 2009 7:24 am

If you've got the basic functions to work, you have made good progress. Please post your RM file and I'll see if I can expand it for you.

Post by **The Robman** » Tue Feb 03, 2009 9:36 am

Here's an untested PL file for the Cisco:
https://www.hifi-remote.com/forums/dload ... le_id=6207

msprandel · Post by **msprandel** » Wed Feb 04, 2009 5:44 am

Hello Robman,

thanks you so much for the file, I will test it asap. My initital post was probably a bit misleading. I just used a custom code in the setup options, so I do not actually have an RM file i could send. Thanks again.

Martin

Post by **The Robman** » Wed Feb 04, 2009 7:15 am

Could you provide more details about the custom code that you used please. I am trying to help the guys at Slingbox get this box working, and they're not aware of any code that even partially works.

msprandel · Post by **msprandel** » Thu Feb 05, 2009 6:35 am

The code i have been using is C1982, but the basic functions also worked for me when using manufacturer Comcast and model other and then selecting 8 from the drop down list. I tried the file you posted last night and for some reason, it did not work at all - meaning none of the remote buttons had actually any effect on the box. I loaded the file by putting it into the SBAV folder of my player install (V2.0) and then entering C2000 into the Custom code field.

I am not a hundred percent sure about the last two digits of C1982 and I have no way of checking from the office. I'll verify it as soon as I get home and update the post.

just found the post on avsforum.com i got the code from
(http://www.avsforum.com/avs-vb/showthre ... p=14612563)
made by mmatheny:

Someone posted that the old remote will not work with the new RNG200 box. Well, here's the scoop. The new remote would not operate all functions of my Samsung TV - mainly the OK button, which needs to work to be able to do anything. So I checked the codes stored on both the old and new remotes for the cable box. The old remote had 01877, the new was 01982. So, I programmed the Cable button on the old remote with the new code, 01982. Viola, it now worked the RNG200! However, I later found out that the Exit button would not work with the new DVR (Bummer -- why did they screw up the codes between remotes - now I cannot use the remote with my TV!) Oh well, can't seem to win for losing with Comcast! Good thing is that there is a JP1 connector on the remote, so maybe I can straighten out the codes. (http://www.hifi-remote.com/jp1/)

Please note, the remote is a JP1.2/3 and if you want to tinker, you will need to order the JP1.2/3 cable ($17.99 shipped)

since I would get invalid code when entering 01982, i tried replacing the 0 with a C and voila it accepted it.

Post by **The Robman** » Mon Feb 09, 2009 8:59 am

I have updated the PL file to reflect the data in the CBL/1982 code:

https://www.hifi-remote.com/forums/dload ... le_id=6207

Post by **The Robman** » Tue Feb 10, 2009 9:01 am

Here is the RM file...
https://www.hifi-remote.com/forums/dload ... le_id=6232

msprandel · Post by **msprandel** » Wed Feb 11, 2009 10:25 am

Thanks a lot Robman,

I will install and test the files later today.

Post by **The Robman** » Wed Feb 11, 2009 11:46 am

If that file doesn't work, here's a different experiment:

RM;
https://www.hifi-remote.com/forums/dload ... le_id=6236

PL BIN:
https://www.hifi-remote.com/forums/dload ... le_id=6237

msprandel · Post by **msprandel** » Tue Feb 17, 2009 8:09 am

Hi Robman,

just tried the last file you sent and I was finally able to get the box to record

A major breakthrough. some of the mapped buttons do not seem to do anything, but maybe that is because they only work in a certain context. If you want me to, I can compile a list with the functions that are currently working and their mapping on the SlingRemote. Thanks for your efforts!

Martin

Post by **The Robman** » Sun Feb 22, 2009 3:11 pm

Yes please

SilentRick72 · Post by **SilentRick72** » Wed Apr 15, 2009 10:47 pm

Sorry if this has already been covered to death and if this post is rather wordy. But I have been trying to follow the discussion on this topic and have gotten some items to work but am not sure what code or files I should be using.

First I figured I would point out an issue that had me thinking none of the codes were working. The IR sensor on this cablebox/dvr is set back and angled down behind the word select. If you don't place your IR blasters over this exact spot it won't work.

C2000 got me initially working but was missing some items so I searched some more and found the built-in C1982 was recommended over a custom PL version when using the Pro HD.

I have switched to the built-in C1982 but am finding that it really could use some tweaking to have some of the keys/buttons that are missing or named Custom01, etc to what their function really is.

I am new to this topic and have been trying to fgure out whether I have the ability to reconfigure the built-in C1982 to address these items or if someone else has already done the work. Or if someone needs further info from a user like me to pinpoint what works and what doesn't.

From what I have found so far the mappings I am referring to are:
C1982:
PIP Toggle: Custom01
A key: Custom10
B Key: Custom11
C Key: Custom12

Items I could not find include MyDVR, but I am sure there are others.

Am I on the right track or has an updated or official support been developed for this device?

SilentRick72 · Post by **SilentRick72** » Sun Apr 19, 2009 8:46 am

I have done some more work and have documented what works and what maps to the Custom items. I am happy with the setup and can live with this until a better solution comes along.

Slingbox Pro HD & Cisco RNG200 DVR working settings.

During SlingPlayer Setup Assistant:Select for device type: Cable Box, other, custom code - C1982

Here are the mappings I have figured out so far that have no exact name match.

DVR remote: Sling remote

PIP Toggle: Custom01
PIP Swap: Custom04
PIP Pos: Custom05
PIP Ch+: Custom07
PIP Ch-: Custom08
A key: Custom10
B Key: Custom11
C Key: Custom12
List: Settings
Power: Power on/off

Unmapped DVR remote items:
MyDVR - functionaly same as List? Just use Settings(List).

Unusable Sling remote items:
Power on
Power off

Post by **The Robman** » Sun Apr 19, 2009 9:54 am

The C1982 code is resident in the ROM of the RV box and can't be adjusted, though I may be able to track down some button codes based on the info you posted.

However, if you were to try testing one of the upgrades that I posted back in February and tell me which one (if any) works and what buttons do what within that upgrade, then I can tweak it to do what you want.

JP1 Remotes

IR Codes for Cisco RNG200

IR Codes for Cisco RNG200

Cisco RNG200 & SlingBox Pro HD

Update to my question above