Australian Foxtel IQ IR codes for US Slingbox solo?

karaokechamp · Post by **karaokechamp** » Sat Mar 21, 2009 7:54 pm

Hi folks. I have just joined this forum, and was hoping someone could help me out with an issue I have that I am finding very difficult to rectify. I recently purchased a 'slingbox solo' from the US on ebay. I live in Australia, and have a foxtel IQ box which I am using the slingbox to stream the signal from the box over the Internet. This works fine, except I cannot change the channels using the online remote as the program (slingplayer) does not have an option for Foxtel IQ to allow the user to select the correct IR codes. Someone told me that the IQ box uses the same codes as the PACE models found elsewhere overseas, or SKYBOX in the UK, but I have tried the couple of 'pace' codes available on the software, and they don't work. WOuld anyone possibly know how I could get this working? I will need to enter the codes manually I expect.

Any help would be greatly appreciated.
TIA Glen

Post by **The Robman** » Sat Mar 21, 2009 9:03 pm

We have an upgrade for an Australian Foxtel IQ right here...
https://www.hifi-remote.com/forums/dload ... le_id=3239

and I just used it to create a Slingbox (PL) bin file here...
https://www.hifi-remote.com/forums/dload ... le_id=6432