keymap-master codes show up incorrectly in IR (bug???)

rtaheri · Post by **rtaheri** » Mon Feb 09, 2009 10:42 am

Hello JP1 gods,
Let me start by acknowledging that this will very likely turn out to be a pilot error. If so, apologies in advance.

I have this problem with the device upgrades for the Samsung_LN46A550 (TV) and Sony_Receiver_Combo 0158_8910 (Sony DB830 audio receiver). Let me describe the problem:

Download keymap-master-v9.16 and IR 7.15. Load Sony_Receiver_Combo 0158_8910 into KM, and change the remote to 15-134. In buttons, assign the Discrete ON/OFF buttons to the power on/off functions. Copy the device upgrade code and paste it into IR. Look at the Discrete ON/OFF. It says [Not Mapped].

Load Samsung_LN46A550 into KM, change the remote to 15-134, but don't make any other changes. Observe that phantom1 is mapped to Antenna, which has the EFC code 00150. Copy and paste into IR. Observe that phantom 1 shows up as EFC code 00061 (which is select component 1).

What am I doing wrong?

Thanks,
Reza

Post by **The Robman** » Mon Feb 09, 2009 10:44 am

Please provide links to the files that you are using so we can try to replicate the problem.

Thanks

mdavej · Post by **mdavej** » Mon Feb 09, 2009 11:08 am

Make sure you have the latest RDF. The discretes and phantoms may have moved around a bit in the past few months. So you may have to rework your upgrades a bit. The latest RDF's appear to be in sync with the latest KM now. Sorry for the confusion.

rtaheri · Post by **rtaheri** » Mon Feb 09, 2009 2:08 pm

OK, here are the links. To make sure, I re-downloaded everything to a new folder as I am writing this post.

Get the RDFs from https://www.hifi-remote.com/forums/dload ... le_id=3950

Above does not have the 15-13X. Get the additional RDFs from https://www.hifi-remote.com/forums/dload ... le_id=5582

Get IR from https://www.hifi-remote.com/forums/dload ... le_id=4507

Get KM from https://www.hifi-remote.com/forums/dload ... le_id=1888

Get the Samsung TV device upgrade file from https://www.hifi-remote.com/forums/dload ... le_id=5513

I then went through the steps outlined in the original post, and again see the phantom 1 key as showing up with EFC 061 (not the correct 150).

Thanks,
Reza

mr_d_p_gumby · Post by **mr_d_p_gumby** » Mon Feb 09, 2009 3:01 pm

Those updated RDF files have changed the naming of the phantom keys after the 15-134 was added to KM, so IR will not agree with KM's names now.

Here is a translation table:
KM DiscreteOn = IR phantom7
KM DiscreteOff = IR phantom8
KM phantom1 = IR DiscreteOn
KM phantom2 = IR DiscreteOff
KM phantom3 = IR phantom1
KM phantom4 = IR phantom2
KM phantom5 = IR phantom3
KM phantom6 = IR phantom4
KM phantom7 = IR phantom5
KM phantom8 = IR phantom6
KM phantom9 = IR phantom9

mdavej · Post by **mdavej** » Mon Feb 09, 2009 3:40 pm

Reza,

Sorry for the mixup. HERE's an older RDF for you that matches KM.

Mike,

Sorry about that. I was trying to make the 13x phantom arrangement as logical as I could across all models, with consideration to the extender as well. I didn't even realize you had already added the 133 and 134 to KM until I saw this post.

I just happened to be using the same version as you on the computer I'm on at the moment. So the mapping worked fine when I tried it.

rtaheri · Post by **rtaheri** » Mon Feb 09, 2009 10:23 pm

Thanks for the quick attention, guys. I switched to the older rdf file, and it is working now.

Cheers,
Reza