Remote For Teac DV-D990 Doesnt Decode,,

johnsfine · Post by **johnsfine** » Wed Jan 07, 2004 12:24 pm

I just posted the new DecodeIR.dll to correctly decode these.

Decode_IR_DLL.zip

It displays the two byte hex needed to create KeyMoves with setup code AUDIO/0286, but due to the limitations of the interface between IR and DecodeIR it displays "or" between them as if they were two possibilities, rather than used together.

Next I plan to add a minor enhancement to RemoteMaster, so that it can produce correct upgrades (do the checksum calculation from device, subdevice and OBC) for protocol 00BB.

usblipitor · Post by **usblipitor** » Wed Jan 07, 2004 1:33 pm

johnsfine wrote:decode_IR_DLL.zip

John, the link needs a capital d: Decode_IR_DLL.zip. Oh, and thanks for all the hard work!

mwinters · Post by **mwinters** » Thu Jan 08, 2004 5:20 pm

Hey guys, thanks for all the help, the new files work great, now i can actually use the teac properly with my remote.. its been an interesting learning experence..

Mathew.

johnsfine · Post by **johnsfine** » Thu Jan 08, 2004 5:37 pm

Did you create an upgrade with protocol 00BB or KeyMoves with AUDIO/0286, or what? I thought we hadn't yet provided quite enough info for a non expert to proceed to a working remote.

Post by **The Robman** » Thu Jan 08, 2004 6:11 pm

johnsfine wrote:Did you create an upgrade with protocol 00BB or KeyMoves with AUDIO/0286, or what? I thought we hadn't yet provided quite enough info for a non expert to proceed to a working remote.

I created some KM files...

The Robman wrote:I have also created both a regular KM upgrade for this, and a second upgrade which just contains all the "gap" OBCs. You can use this second upgrade to search for discrete codes and any other functions your device might support that are not on the remote.

Teac-mini-system-DV-D990.txt
Teac-mini-system-OBC-gaps.txt

If you find any additional functions, let me know so I can add them to the main KM file. Also, let me know how the main KM file works out.

Hey Matthew, did you try the second file with the gao OBCs? And if so, did you find any additional functions?

mwinters · Post by **mwinters** » Thu Jan 08, 2004 9:57 pm

johnsfine wrote:Did you create an upgrade with protocol 00BB or KeyMoves with AUDIO/0286, or what? I thought we hadn't yet provided quite enough info for a non expert to proceed to a working remote.

I loaded the file to the keymap-master.xls and used Audio 0400 (just so its not confused).. and mapped the keys I wanted then uploaded, seems to work quite well..

I have not tried the other file, it might be a bit hard to figure out what the function is as there is no front panel button missing as far as I can tell..

Post by **The Robman** » Thu Jan 08, 2004 10:13 pm

The main thing you might hope to find are discrete on and off codes. Sometimes there are other little secrets that you can find. I suggest that you just load the file (temporarily) into your remote and then try all the buttons to see if any of them appear to do anything. If they don't, it's no biggie. If one of them turns the unit off (and repeat pressings keep the unit off), you will have found the discrete off command. Then you have to try the process again to find the discrete on (which might well be the next highest or lowest OBC to the OFF code).

mwinters · Post by **mwinters** » Fri Jan 09, 2004 7:46 pm

I didnt find any on/off codes, there didnt seem to be anything new, some of the codes appear to repeat what already is there, a couple of others were hard to disconcern their exact function..