OK, I did it! Rob, thanks for your patience in working with me here! Is it ok to post a bin file for this receiver on this site. It would help others if they're interested.
Basically the sv-360 file on this forum(scroll up) has to be opened through the remote master. From there you choose your own 4 digit code and choose a sling player. JU, or PL.
PL is what worked for me.
Most importantly. make sure you SAVE your JU, PL files. and then go to advanced and click on Export binary file as well.
So here's what you will be doing.
Click File:- Save file as.. (save your file andname it.
Then click on ADvanced:- Export Binary File. If it's a JU file you saved then your Binary file will be saved as JU.
Repeat the same process for PL file as well.
Hope this helps!
ROB. Thanks again!
Btw Rob, i found a 8910 remote but i would need a JP1 cable! You have any available?
sonicview sv-360 premier (how to decode raw code)
Moderator: Moderators
-
The Robman
- Site Owner
- Posts: 21887
- Joined: Fri Aug 01, 2003 9:37 am
- Location: Chicago, IL
- Contact:
Of course...eterna1venom wrote:Is it ok to post a bin file for this receiver on this site. It would help others if they're interested.
http://www.hifi-remote.com/forums/dload ... &cat_id=97
I don't but the other vendors do...eterna1venom wrote:Btw Rob, i found a 8910 remote but i would need a JP1 cable! You have any available?
http://www.hifi-remote.com/forums/viewforum.php?f=4
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!