JP1 Remotes

friday · Joined: 21 Oct 2008 Posts: 71

hi again,
this upgrade works fine with my amp nad t763 on dreambox v4 remote, but it contains no power-off comand. only power-on. this is no toggle on htr2.
is it possible to add power-off cmd to this upgradefile? or how can i switch power-off?
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=465

friday

Mark Pierson · Posted: Fri Nov 14, 2008 10:22 am Post subject:

The other NAD files are using EFC 189 (OBC 128) for POWER with the same NEC1:135:124 device settings. One also shows the following discretes:

ON: EFC 216 (what your upgrade is using)
OFF: EFC 045
_________________
Mark

The Robman · Posted: Fri Nov 14, 2008 10:30 am Post subject:

I have just updated that file to include those codes.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

friday · Joined: 21 Oct 2008 Posts: 71

thanks mark, thanks rob

efc 045 works fine with my nad-t763

friday

friday · Joined: 21 Oct 2008 Posts: 71

i think there is still a little problem with "power on"
i figured out, that i have to push twice on the button to turn the device on. i can see it at the little led on my amp. every time i switch to the htr2-device on my remote, only the 2nd push was recognized by my amp. but it is ONLY with "power on" every other cmd are ok.

can this be fixed or is something wrong in this protocol?

friday

The Robman · Posted: Mon Dec 01, 2008 9:46 am Post subject:

The fix would be to include two presses of the POWER ON button in your power on macro.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

friday · Joined: 21 Oct 2008 Posts: 71

of course i can make it so, but its not only in a macro. when i use this upgrade only it is too.

can it be that this "power on" cmd is a bit strange to the others?

friday