Hifi-Remote.Com - JP1 remotes and cables for sale

GQ Smooth · Post by **GQ Smooth** » Mon Aug 04, 2008 6:12 pm

I'm not sure why the note didn't appear in your Paypal account. I just went and check my account and the note was attached. This is the body of the note I sent.

Good day Rob,

This is GQ Smooth from your website. I would like to purchase the URC-8910. Please load Akai upgrade #13 into the remote to be used with a Viore PDP4210EA plasma tv. Please also send a manual.

Post by **The Robman** » Mon Aug 04, 2008 7:39 pm

Somebody else also placed an order for a URC-8910 yesterday and I thought that was you. Now I see your payment, but unfortunately I am going to have to deny it because you sent it to the wrong account. You are apparently using a credit card to fund the transaction, so you'll need to send the funds to my credit card enabled paypal account and include the surcharge.

The full payment details are in the first post of this thread.

GQ Smooth · Post by **GQ Smooth** » Tue Aug 05, 2008 4:30 am

Hi Rob, I place two new orders to the credit card account, this morning. The first one I forgot to include the surcharge so I re-submitted it. Can you please cancel the first order from this morning. Sorry about that. I also included the same note from my previous submission.

Immune_Jam · Post by **Immune_Jam** » Fri Aug 08, 2008 12:04 am

Hi Rob,

I just noticed that on the first page, the store is closed, but you seem to be taking orders? If this is the case, then read on! If not, disregard!

I am after 3 urc-8910's, with international shipping (Australia), with paypal CC payment.

I calculated that this would be $75 - 3 remotes, $12 - shipping and $4 - surcharge. Grand total of $91.

If this is correct, let me know and I will paypal you. If you are not selling anymore - bugger!

Post by **The Robman** » Fri Aug 08, 2008 10:02 am

I think I can squeeze three URC-8910s into one box, so the $12 shipping should be good, and I think I've got just enough 8910s left to cover you, so go ahead and place your order. I'm planning on sending out the pending orders this weekend.

Immune_Jam · Post by **Immune_Jam** » Fri Aug 08, 2008 6:52 pm

Rob,

Have just sent the money for 3 urc-8910's via paypal.

Thanks

Post by **The Robman** » Sun Aug 10, 2008 11:03 pm

I have just filled all the pending orders for URC-8910 remotes, and I am now sold out. I still have modified URC-6131 remotes ready to go and I have URC-6131N that I can modify if someone needs.

weasel · Post by **weasel** » Thu Aug 21, 2008 9:03 am

Hi,

I've been pointed over here by an aricle explaining how I can use a JP1 remote control to program a slingbox (see http://www.slingcommunity.com/article/1 ... textpage=1 for details). I see that the shop appears to be closed, so I am wondering where I an buy a URC-8910 and a serial cable so that I can make my slingbox work with my new EUROVOX PVR. I am in UK, but will pay for international shipping etc

Thanks in advance
Chris

Rob144 · Post by **Rob144** » Thu Sep 04, 2008 2:36 am

Rob,

Re your last post Aug 11 saying you have a 6131N you can modify if someone needs.

If you're still taking orders I would love to get a modified URC-6131N despatched internationally to Tasmania, Australia.
Price based on Page 1 would be US$25 plus Shipping US$12 = US$37.00
I can pay using PayPal direct to your bank account.

My present remote does not have separate Mute and OK/Select buttons so Mute has been assigned to the Up Arrow key. I'd attach an image of my URC-7562-B01 illustrating this only it was too difficult

Also, I'm not willing to risk putting an extender onto it because of its B01 configuration.

Thanks for reading this,

Robert (Rob144)

Post by **The Robman** » Thu Sep 04, 2008 10:49 am

I do have a pending order for a URC-6131N from someone else already, so I am planning on modifying some of them in the near future, so you can go ahead and place an order if you like. I hope to get the remotes modded in the next week or so.

Rob144 · Post by **Rob144** » Sat Sep 06, 2008 10:51 pm

Will definitely place an order for 6131N in a couple of days. I'm waiting for PayPal to clear the funds I have deposited in my PayPal account.

Thanks,

Robert (Rob144)

lsidonis · Post by **lsidonis** » Fri Sep 12, 2008 5:12 pm

Hello Robman,

I also need three (3) 6131N if you have them. I also need a USB cable for them if you can provide it too. Is that the only cable I will need, USB port to the remote?

Please get back to me with a total (shipping to 43085) and I'll get you paid right away. Email would be best for me.

Thanks,

Post by **The Robman** » Fri Sep 12, 2008 7:53 pm

I don't have any cables left, but I do have some URC-6131Ns.

gstrickland · Post by **gstrickland** » Sat Sep 13, 2008 5:51 am

Rob,

Is the store closed *permanently*? Or do you intend to start up again? If so, when, approximately, do you expect to be in business?

If you plan on reopening the store, I'll wait. I've bought all my stuff from you over the years, and I can wait. If you don't, would you be so kind as to recommend a JPx equivalent replacement for the 8910 and where to buy it?

Gray

Post by **The Robman** » Sat Sep 13, 2008 10:22 am

I don't have any immediate plans to properly re-open. I originally closed because I just didn't have the time to keep working it, which is still the case, but now there's an additional consideration. I used to buy my remotes from CT Global when they were the folks behind One For All, but now it's all moved to Audiovox and I don't have a contact there yet.

I am still selling the few remotes that I have left (which are the URC-6131, URC-6131N and URC-8820) on an "as needed" basis. Actually, I probably have a few other models in stock but I haven't sorted them all out yet. I think I have one or two URC-8910s if that's what you're looking for.

JP1 Remotes

Hifi-Remote.Com - JP1 remotes and cables for sale

Where can I buy this stuff

Rob, URC 6131n needed