JP1 Remotes Forum Index JP1 Remotes


FAQFAQ SearchSearch 7 days of topics7 Days MemberlistMemberlist UsergroupsUsergroups RegisterRegister
ProfileProfile Log in to check your private messagesLog in to check your private messages Log inLog in
File SectionFile Section File SearchFile Search Lookup ToolLookup Tool WikiWiki

AVERDigi DVR

 
Post new topic   Reply to topic    JP1 Remotes Forum Index -> JP1 - Protocol Decodes
View previous topic :: View next topic  
Author Message
Audiophile



Joined: 28 May 2008
Posts: 2

                    
PostPosted: Wed May 28, 2008 10:12 am    Post subject: AVERDigi DVR Reply with quote
Hi, I'm new to JP1 and I'm trying to control a AVERDigi CCTV DVR recorder (EB1704 Hybrid) over a slingbox - without success so far.

I've used a Philips Pronto to learn the IR commands and I get the following:

"1 Button" - 900A 006D 0000 0001 00E7 01FE
"2 Button" - 900A 0068 0000 0001 00E7 02FD
etc. etc.

I've tried using IR Tool but it doesn't recognise the Pronto 900A hex codes. I believe this code is for NEC protocol but all the NEC varients I've tried in Remote Master have failed to work so far.

Any help anyone could offer in getting this working would be much appreciated.

Many thanks,

Nick
Back to top
View user's profile Send private message
johnsfine
Site Admin


Joined: 10 Aug 2003
Posts: 4766
Location: Bedford, MA
                    
PostPosted: Wed May 28, 2008 11:38 am    Post subject: Re: AVERDigi DVR Reply with quote
Audiophile wrote:

"1 Button" - 900A 006D 0000 0001 00E7 01FE
"2 Button" - 900A 0068 0000 0001 00E7 02FD


It is NEC1 protocol.

Either the 6D or the 68 is a learning error. With correct learns, that number will be the same across this entire set of signals. 6D would be ordinary NEC1. 68 would be NEC1 at 40Khz. The device probably works either way, but likely one way is more reliable than the other.

The 00E7 represents the device and subdevice (device 0, subdevice 231).

The 01 and 02 (following the E7) are the OBC numbers. For larger values, you must translate from Hex to decimal to get the OBC. JP1 hex is not the same, so you cannot just put the hex value in the hex column in RM.
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Audiophile



Joined: 28 May 2008
Posts: 2

                    
PostPosted: Wed May 28, 2008 12:29 pm    Post subject: AVERDigi DVR Reply with quote
Fantastic - that did the trick

Thanks a million!
Back to top
View user's profile Send private message
The Robman
Site Owner


Joined: 01 Aug 2003
Posts: 21238
Location: Chicago, IL
                    
PostPosted: Thu Jul 31, 2008 8:17 pm    Post subject: Reply with quote
Please load your upgrade file into the file section.
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic       JP1 Remotes Forum Index -> JP1 - Protocol Decodes All times are GMT - 5 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


 

Powered by phpBB © 2001, 2005 phpBB Group
Top 7 Advantages of Playing Online Slots The Evolution of Remote Control