| View previous topic :: View next topic |
| Author |
Message |
kennyt
Joined: 20 Jun 2008
Posts: 4
|
 Posted: Fri Jun 20, 2008 1:22 am Post subject: Convert WINLIRC to JP1- URGENT HELP NEEDED!! |
 |
|
HELLO People,
I have got the wrong version of the slingbox, and currently trying to set it up in asia, which the cable boxes are not suported by the Slingbox........
So we are trying to make a remote by ourself, sounds crazy but we are almost done. Hardware is done jsut need to convert the WUNLIRC code to the JP1 code then we are done.
PLease help us and let us know how to convert the WINIRC code to JP1 code, we will psot more pictures when we are done with it, this is FUN... hahaha
Is there a way to convert the lirc configuration file into a jp1 compatible configuration?
Here's a sample of a lirc configuration file:
#
# this config file was automatically generated
# using WinLIRC 0.6.5 (LIRC 0.6.1pre3) on Fri Jun 20 13:04:11 2008
#
# contributed by
#
# brand: tvmateremote
# model:
# supported devices:
#
begin remote
name tvmateremote
bits 16
flags SPACE_ENC
eps 25
aeps 100
header 9117 4412
one 646 474
zero 646 1599
ptrail 646
repeat 9116 2156
pre_data_bits 16
pre_data 0xBF40
gap 39840
toggle_bit 0
begin codes
power 0x000000000000FF00
1 0x0000000000005FA0
2 0x0000000000009F60
3 0x0000000000001FE0
4 0x0000000000006F90
5 0x000000000000AF50
6 0x0000000000002FD0
7 0x0000000000004FB0
8 0x0000000000008F70
9 0x0000000000000FF0
0 0x0000000000007788
chup 0x00000000000007F8
chdn 0x0000000000008778
voup 0x0000000000003FC0
vodn 0x000000000000BF40
jump 0x000000000000D728
meun 0x000000000000EF10
video 0x000000000000CF30
pcav 0x000000000000F708
mute 0x000000000000E718
picture 0x00000000000027D8
end codes
end remote
-----> Try this out.
Guys please help!!
Kennyt |
|
| Back to top |
|
 |
kupakai
Joined: 29 Sep 2006
Posts: 283
Location: New York
|
| Posted: Fri Jun 20, 2008 3:13 am Post subject: |
|
|
That seems like a NEC1 format. Try it with device number 191. Convert the fourth and the third digits from the right from hex to decimal to get the OBC for each of the functions. For example, for "1", it would be 5F which is 95 in decimal.
BTW, there is really no need to post the same question in three different places in this forum. |
|
| Back to top |
|
|
johnsfine
Site Admin
Joined: 10 Aug 2003
Posts: 4766
Location: Bedford, MA
|
| Posted: Fri Jun 20, 2008 8:19 am Post subject: |
|
|
| kennyt wrote: |
one 646 474
zero 646 1599 |
Note to other experts, always check this part of an lirc file. It is more often backwards as it is this time.
When it is correct, the lirc hex data is LSB. But when it is backwards as in this example the lirc hex data is LSB comp.
Using LSB comp it is device 2.
| kupakai wrote: | | That seems like a NEC1 format. |
It is.
| Quote: | | Try it with device number 191. |
Device 191 is an MSB translation of the BF. But lirc nec1 almost always uses LSB or LSB comp.
Try it with device 2.
| Quote: | | Convert the fourth and the third digits from them right from hex to decimal to get the OBC for each of the functions. For example, for "1", it would be 5F which is 95 in decimal. |
That would be correct again if this lirc file used MSB. But it uses LSB comp. So you could use one of a few JP1 tools to do LSB comp translation of that digit pair (instead of ordinary hex to decimal) to get each OBC.
But, by good luck, the JP1 executor for NEC1 also uses LSB comp. That means on the function sheet of RemoteMaster you can fill in the hex column (instead of OBC and EFC) using the digit pair selected as Kupakai described and RM will compute the OBC and EFC. |
|
| Back to top |
|
|
kennyt
Joined: 20 Jun 2008
Posts: 4
|
| Posted: Fri Jun 20, 2008 10:31 pm Post subject: Sorry and need more HELP |
|
|
Hi guys,
sorry to post to 3 forums, jsut didnt have any idea that where I should get this posted. Kind of frustrated and trying so hard to get it work.
Apologize for that 
Here are some more questions below:
When using 1.86 RM, we can open RM, but not the RDF file, when we tried to open the RM, we were unable to open the RDF file. Please help! I have also downloaded the slingbox RDF file from the download section, but still not able to open to manually type HEX or OBC within the function.
PLease help and sorry to post at multiple forums
Tks
kennyt |
|
| Back to top |
|
|
kennyt
Joined: 20 Jun 2008
Posts: 4
|
| Posted: Sun Jun 22, 2008 2:19 am Post subject: IT's WORKING |
|
|
Dear all,
Finally got it to work now.
Thanks so much for the help guys. U guys are great.
THANKS AGAIN, will update some info later for someone who will be doing this type of stuff.
ciao
Kennyt |
|
| Back to top |
|
|
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21237
Location: Chicago, IL
|
| Posted: Sun Jun 22, 2008 1:25 pm Post subject: |
|
|
Be sure to post your upgrade file, then post a link to it here.
Also, please state what device this is for.
Thanks
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help! |
|
| Back to top |
|
|
kennyt
Joined: 20 Jun 2008
Posts: 4
|
| Posted: Wed Jun 25, 2008 8:30 am Post subject: |
|
|
We use device NEC1 device 2 and fill in the hex column using the digit pair 4&3 . Finally , it does work with SlingBox Solo.
We did upload the Bin code in File Section.
Sorry, unable fine the brand name in English only get the device name which we bought in Taiwan 5 years ago.
Here is the cablebox PIC
http://img.ruten.com.tw/s1/0/e1/f1/11080316727793_435.jpg
Thanks so much for the help . |
|
| Back to top |
|
|
The Robman
Site Owner
Joined: 01 Aug 2003
Posts: 21237
Location: Chicago, IL
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
File Section
Wiki
