Hifi-Remote.Com - JP1 remotes and cables for sale

[Steve]

Thanks buddy....I think I will give the serial build a try...my wife works at Mouser so I can get everything I need there...I guess no one sells the pc boards already cut for this model ??

Also...can you add a pilot light on the serial design to show transmission ??

Thanks again !!

[mvh_2000]

Hi Robman,

Sounds like you have had a bad few months. Hope all is going better? Not sure if you are shipping remotes again from the past few posts i've read in this thread?? If so I would like to buy 3 or 4. No rush on sending them out. Just let me know and I will send the money. I have no problem kicking in a extra $25 dollars on the order for the use of this great site.

Thanks
MVH

[The Robman]

Hi MVH,
I am willing to start shipping orders again, but I won't be doing it everyday like I did before, I'll probably just take care of them on weekends (due to lack of time). I haven't updated the 1st post here to reflect that because I don't want a flood of new orders.

[venik]

Batrad wrote: "I bought a parallel cable from Rob and it works with the T43 I have using XP SP2. I had to change the Parallel Port to use IO Resource Range of 0378-0379 on the Resource Tab and enable legacy Plug and Play support under Port Settings tab of LPT1"

Batrad-- Did you reverse any of the batteries, or used 4 batteries? Were you using a 15-2116 or another remote?

Try that and see if it helps

Hi Rob,
Sorry to hear about the flood.
I would like to get a URC-8910 with a USB or some other cable interface to my Thinkpad 43p. I have the old parallel cable (which I used with my wonderful 15-2116), but it does not work with the TP43p.
If you tell me which cable I need and how much it costs, I shall send you the money by PayPal.
Although I am eager to get it, your flood recovery is, of course a higher priority.

Thanks--

[batrad]

No batteries reversed

using a URC 9960 and a URC 8910 without issues. batteries are in the remote.
Cable only works one way..try reversing the 6 pin connector in the remote

Make sure you configure the parallel port under control panel / system / Hardware/ device manger

Batrad wrote: "I bought a parallel cable from Rob and it works with the T43 I have using XP SP2. I had to change the Parallel Port to use IO Resource Range of 0378-0379 on the Resource Tab and enable legacy Plug and Play support under Port Settings tab of LPT1"

Batrad-- Did you reverse any of the batteries, or used 4 batteries? Were you using a 15-2116 or another remote?

Try that and see if it helps

[mvh_2000]

Thanks Rob, I sent the money for 3 6131 Remotes.

MVH

[suemarsh]

Hi, I am based in the UK. Please could you tell me if you have a URC 8910 and JP-1 usb cable. I need it to control a DVR (a Digifusion FVRT90).

The aim is to use the remote control to create my own Slingplayer remote - see this article;

http://www.slingcommunity.com/article/1 ... textpage=2

Please let me know the cost to send the UK.

Thank you very much for your help.

Sue Marsh

[The Robman]

I don't have any USB cables.

[mista350z]

I just bought a Viore 42in Plasma PDP4210ea and it didnt have a remote. Can anyone guide me where to get a remote (original or universal) that will work?

[MaskedMan]

I just bought a Viore 42in Plasma PDP4210ea and it didnt have a remote. Can anyone guide me where to get a remote (original or universal) that will work?

Viore oem remote.

[billinparis]

Hi Rob - I need to figure out how to make a Philips DVR talk to the Slingbox, and from reading this forum, it looks like I need a 8910 or 9910 and a J1 cable... and lots of time. Can I order these from you?

URC-8910 - $19 (or the 9910, if there are no 8910s)
JP1 "Simple" parallel - $15
Shipping (Europe) - $11
Paypal Charges = $4.50
TOTAL = US$50

Is that correct?

-Bill

[johnsfine]

I hate to discourage buying those things from Rob. But do you really need them? Aren't the signals you want available online somewhere, such as
http://www.remotecentral.com/cgi-bin/fi ... br=philips

I looked at a CCF file for the Philips DVR6000 (from the above link) and saw that the IR signals were ordinary Tivo signals (which you can find all over hifi-remote and RemoteCentral). If your "DVR" is a similar device to the DVR6000, maybe you should try using Tivo signals on it.

[mvh_2000]

Hello Rob,

I would like to start playing with a 9960 Kameleon. They seem a little hard to get? Do you have any for sale? I have no problem paying retail price for a new one plus the cost of mods to you. I seen one on Best Buys web site for $58.99 that says "in stock". If you don't have any for sale can I buy one and send it to you for the mods? If thats possible, let me know. Does the 9960 use the simple parallel JP1 interface after the mod?

Thanks
MVH

[Jim Gilliland]

Are there any JP1 remotes that I can just walk into a store and buy these days? Best Buy used to carry several of them, but they don't seem to carry them any more (at least according to their website). Circuit City and Walmart don't seem to have them either. Any thoughts?

[mvh_2000]

http://www.bestbuy.com/site/olspage.jsp ... 1826213181

I think they have them?