JP1 Remotes

Rafa · Joined: 19 Sep 2007 Posts: 6

I was making a "device update" for the remote of my Samsung DVD-HR735, because there was any code working, and the memory is not enough to handle all the buttons.
I got on ALL learned signals something like:
Gap-468-1477-16? 32 0
Gap-468-3461-37? 0 0 0
and without EFCs or HexCmd.
I've tryed to learn them again, change the batteries, etc... and nothing, it seams the protocol is really missing.
Does anyone know how to overpass this issue?
Are there any updates to the IR705 or to RemoteMaster1.81 that handle these protocols?

I uploaded the "ir" file with the learned signals for diagnostic to:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=5040

My remote is the: URC-7555 OFA5 (One For All 5)
_________________
Pedro Rafael Almeida

The Robman · Posted: Wed Sep 19, 2007 1:38 pm Post subject:

These signals look the same as those described here:
http://www.hifi-remote.com/forums/viewtopic.php?t=6385

Those signals are for a Samsung DVD-HR725, so my guess is that they'll also work for your DVD-HR735. However, this upgrade uses a custom protocol that was written for S3C8 remotes, whereas you have an HCS08 remote, so somebody would need to convert the protocol to that format.

Here's the KM file:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=3168

Here's the PB file:
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=3169
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

Rafa · Joined: 19 Sep 2007 Posts: 6

Who can do that?

Can I do it? Is there a tutorial?

Thaks for the explanation by the way! Razz

_________________
Pedro Rafael Almeida

binky123 · Expert Joined: 14 Feb 2004 Posts: 1292

Try this:
Upgrade protocol 0 = 01 5C (HCS08) Samsung DVD HR725 (PB v4.00)
20 19 22 48 41 8F 45 05 08 00 FA 02 DF 00 FA 00
FA 77 61 08 CA 08 CA 00 00 00 11 3C AA 4E 64 65
33 65 CC FF 7A
End

Rafa · Joined: 19 Sep 2007 Posts: 6

Well... sorry... but now what?

What to to with this protocol upgrade?
I can put it in the Protocol tab of IR and than what do I do?

Sorry, this may be a "basic question", but I'm new at this, and tried to play around, but I didn't figure out the next steps...

And how to use this information in RM?

Thanks!!

Rolling Eyes

_________________
Pedro Rafael Almeida

The Robman · Posted: Fri Sep 21, 2007 10:53 am Post subject:

Here's an RM version of the upgrade...
http://www.hifi-remote.com/forums/dload.php?action=file&file_id=5051
_________________
Rob
www.hifi-remote.com
Please don't PM me with remote questions, post them in the forums so all the experts can help!

Rafa · Joined: 19 Sep 2007 Posts: 6

Thanks !!

It worked fine! Amazing!!!!!

Laughing

The best Forum ever!!
_________________
Pedro Rafael Almeida