Capn Trips Expert
Joined: 03 Oct 2003 Posts: 3990
|
Posted: Sat Sep 15, 2007 12:37 pm Post subject: |
|
|
If it works in TV but not in others, it would appear that the X_TV command leading off your sequence may not be doing what you expect.
In general, it's easiest to troubleshoot by breaking down your Macro/LKP sequence into smaller bits, and testing each one, combining them sequentially, until it breaks.
Like put your short press as a macro on a real button somewhere, and your long sequence on a real button somewhere, test each individually, then build the LKP calling on the two macros, then have a macro calling the LKP, then move the original macros to phantoms or xshifted buttons or whatever.
Since you have plenty of memory, try building a separate identical LKP (wihout the X_Cancel command at the start of the short side) on each device's POWER button and see if THAT works, then we would know that vicky has to look at the X_TV function.
Or try putting the LKP that is called from the macro on a different button - maybe even a real button - just to test if it's a problem of the xSihft-EXIT button identification or something. _________________ Beginners - Read this thread first
READ BEFORE POSTING or your post will be DELETED!
Remotes: OFA XSight Touch, AR XSight Touch
TVs: LG 65" Smart LED TV; Samsung QN850BF Series - 8K UHD Neo QLED LCD TV
RCVR: Onkyo TX-SR875; Integra DTR 40.3
DVD/VCR: Pioneer DV-400VK (multi-region DVD), Sony BDP-S350 (Blu-ray), Toshiba HD-A3 (HD-DVD), Panasonic AG-W1 (Multi-system VCR);
Laserdisc: Pioneer CLD-D704.
Amazon Firestick
tape deck: Pioneer CT 1380WR (double cassette deck)
(But I still have to get up for my beer) |
|